497612
18
Zoom out
Zoom in
Previous page
1/116
Next page
18
TS 55
GB
8.2 Cutting sections
Place the machine with the front part of the saw ta-
ble on the workpiece, switch the machine on, press
it down to the preset cutting depth and push it for-
ward in the cutting direction.
8.3 Sawing cut outs (plunge cuts)
In order to avoid kickbacks, the following in-
structions must be observed without fail
when plunge cutting:
Always place the machine with the rear edge of
the saw table against a fixed stop.
When working with the guide rail, place the ma-
chine against the kickback stop FS-RSP (acces-
sory)
[9-4]
clamped to the guide rail.
Procedure
Position the machine on the workpiece and
push up against a stop (kickback stop).
Switch on the machine.
Push down the machine slowly to the preset
cutting depth and then push forwards in the cut-
ting direction.
The markings
[7-1]
indicate the absolute front and
the absolute rear cutting points of the saw blade
(dia. 160 mm) when using the saw at maximum cut-
ting depth with the guide rail.
8.4 Plaster and cement-bonded fibre boards
Due to the high build-up of dust, use of a cover
ABSA-TS55 (accessory) mounted to the side of the
protective cover is recommended.
9 Service and maintenance
Customer service and repair
only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festool.com/Service
Use only original Festool spare parts!
Order No. at:
www.festool.com/Service
The machine is equipped with special carbon
brushes. If they are worn, the power is interrupted
automatically and the machine comes to a stand-
still.
Observe the following instructions:
To ensure constant air circulation, always keep
the cooling air openings in the housing clean
and free of blockages.
Use an extractor on all the openings of the ma-
chine to remove wood chips and splinters.
9.1 Resharpened saw blades
The cutting depth of resharpened saw blades can
be adjusted accurately using the adjusting screw
[8-1]
.
Adjust the cutting depth stop
[8-2]
to 0 mm
(with guide rail).
Unlock the saw unit and push downwards until
it reaches the stop.
Turn in the adjusting screw
[8-1]
until the saw
blade touches the workpiece.
10 Accessories
The order numbers of the accessories and tools can
be found in the Festool catalogue or on the Internet
under "www.festool.com".
In addition to the accessories described, Festool
also provides a comprehensive range of system ac-
cessories that allow you to use your machine more
effectively and in diverse applications, e.g.:
Parallel stop, table widener PA-TS 55
Side-mounted cover, false joint ABSA-TS 55
Kickback stop FS-RSP
Parallel stop FS-PA and guide extension FS-PA-
VL
Multifunction table MFT/3
Compact Module System CMS-GE with CMS-TS-
55-R
10.1 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all applica-
tions that are specially designed for your Festool
portable circular saw.
10.2 Guide system
The guide rail enables you to make clean, accurate
cuts while simultaneously protecting the surface of
the workpiece from damage.
In conjunction with the extensive range of accesso-
ries, exact angled cuts, mitre cuts and fitting work
can be completed with the guide system. The option
of attaching the guide rail securely using clamps
[9-5]
ensures safer working conditions.
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
EKAT
1
2
3
5
4
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TS 55 RQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TS 55 RQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 11,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info