Manual Festool ts 55 q (page 14 of 94) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian)

383528

Zoom out

Zoom in

1/94

Symbols

Warning of general danger

Manual, read the instructions.

Wear ear protection!

Wear protective goggles.

1 Use for intended purpose

These machines are intended to be used for sawing

wood, wood-like materials, plaster and cement-

bonded fibre materials, and plastics. With the

special saw blades for aluminium offered by Fes-

tool, these machines can also be used for sawing

aluminium.

Only saw blades with the following speciﬁ cations

must be used: saw blade diameter of 160 mm;

cutting width of 2.4 mm to 2.6 mm; toolholder

diameter of 20 mm; blade core thickness of max.

1.8 mm; suitable for speeds of up to 9500 rpm.

Do not use any abrasive wheel.

Festool electric power tools should only be in-

stalled in work benches specially designed by Fes-

tool. The electric power tool may become unsafe

and cause serious accident if installed in benches

from other manufacturers or self-manufactured

work benches.

The user is liable for damage and injury

resulting from incorrect usage!

2 Safety instructions

2.1 General safety rules

WARNING! Read all safety warnings and

all instructions. Failure to follow the warn-

ings and instructions may result in electric shock,

ﬁ re and/or serious injury.

Save all warnings and instructions for future

reference.

The term „power tool“ in the warnings refers

to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

2.2 Tool-speciﬁ c safety rules

1) Cutting procedures

DANGER: Keep hands away from cutting

area and the blade. Keep your second

hand on auxiliary handle, or motor housing. If

both hands are holding the saw, they cannot be

cut by the blade.

b) Do not reach underneath the workpiece. The

guard cannot protect you from the blade below

the workpiece.

c) Adjust the cutting depth to the thickness of the

workpiece. Less than a full tooth of the blade

teeth should be visible below the workpiece.

d) Never hold piece being cut in your hands or

across your leg. Secure the workpiece to a

stable platform. It is important to support the

work properly to minimize body exposure, blade

binding, or loss of control.

e) Hold power tool by insulated gripping surfaces

when performing an operation where the cut-

ting tool may contact hidden wiring or its own

cord. Contact with a „live“ wire will also make

exposed metal parts of the power tool „live“ and

shock the operator.

f) When ripping always use a rip fence or straight

edge guide. This improves the accuracy of cut

and reduces the chance of blade binding.

g) Always use blades with correct size and shape

(diamond versus round) of arbour holes. Blades

that do not match the mounting hardware of the

saw will run eccentrically, causing loss of con-

trol.

h) Never use damaged or incorrect blade wash-

ers or bolt. The blade washers and bolt where

Circular saw

Technical data TS 55 EBQ/TS 55 EQ TS 55 Q

Power 1200 W 1050 W

Speed (idling) 2000 - 5200 rpm 6500 rpm

Inclination 0° - 45° 0° - 45°

Cutting depth at 0° 0 – 55 mm 0 – 55 mm

Cutting depth at 45° 0 – 43 mm 0 – 43 mm

Saw blade dimensions 160x2.2x20 mm 160x2.2x20 mm

Weight 4.5 kg 4.4 kg

Degree of protection

/II /II

The speciﬁ ed illustrations can be found at the beginning of the operating instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool ts 55 q in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1,56 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool ts 55 q Manual

Product: