Manual Festool TS 55 FEQ (page 20 of 150) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

778504

Zoom out

Zoom in

1/150

–Hold the power tool by the insulated han

dle surfaces if you intend to perform work

that entails a risk of cutting into hidden

power cables or the tool's own power ca

ble. Contact with live cables transfers an

electric current to metal components on

the electric power tool and causes electric

shocks.

–When ripping, always use a rip fence or

straight edge guide. This improves the ac

curacy of cut and reduces the chance of

blade binding.

–Always use blades with correct size and

shape (diamond versus round) of arbour

holes. Blades that do not match the mount

ing hardware of the saw will run off-centre,

causing loss of control.

–Never use damaged or incorrect blade

washers or bolt. The blade washers and

bolt were specially designed for your saw,

for optimum performance and safety of op

eration.

Kickback causes and related warnings

– kickback is a sudden reaction to a pinched,

jammed or misaligned saw blade, causing

an uncontrolled saw to lift up and out of the

workpiece toward the operator;

– when the blade is pinched or jammed tight

ly by the kerf closing down, the blade stalls

and the motor reaction drives the unit rap

idly back toward the operator;

– if the blade becomes twisted or misaligned

in the cut, the teeth at the back edge of the

blade can dig into the top surface of the

wood causing the blade to climb out of the

kerf and jump back toward the operator.

Kickback is the result of saw misuse and/or in

correct operating procedures or conditions and

can be avoided by taking proper precautions as

given below.

–Maintain a firm grip with both hands on

the saw and position your arms to resist

kickback forces. Position your body to ei

ther side of the blade, but not in line with

the blade. Kickback could cause the saw to

jump backwards, but kickback forces can

be controlled by the operator, if proper pre

cautions are taken.

–When blade is binding, or when interrupt

ing a cut for any reason, release the trig

ger and hold the saw motionless in the

material until the blade comes to a com

plete stop. Never attempt to remove the

saw from the work or pull the saw back

ward while the blade is in motion or kick

back may occur. Investigate and take cor

rective actions to eliminate the cause of

blade binding.

–When restarting a saw in the workpiece,

centre the saw blade in the kerf so that

the saw teeth are not engaged into the

material. If a saw blade binds, it may walk

up or kickback from the workpiece as the

saw is restarted.

–Support large panels to minimise the risk

of blade pinching and kickback. Large pan

els tend to sag under their own weight.

Supports must be placed under the panel

on both sides, near the line of cut and near

the edge of the panel.

–Do not use dull or damaged blades. Un

sharpened or improperly set blades pro

duce narrow kerf causing excessive fric

tion, blade binding and kickback.

–Blade depth and bevel adjusting locking

levers must be tight and secure before

making the cut. If blade adjustment shifts

while cutting, it may cause binding and

kickback.

–Use extra caution when sawing into exist

ing walls or other blind areas. The pro

truding blade may cut objects that can

cause kickback.

Guard function

–Check the lower guard for proper closing

before each use. Do not operate the saw if

the lower guard does not move freely and

close instantly. Never clamp or tie the

lower guard into the open position. If the

saw is accidentally dropped, the lower

guard may be bent. Raise the lower guard

with the retracting handle and make sure it

moves freely and does not touch the blade

or any other part, in all angles and depths

of cut.

–Check the operation and condition of the

guard return spring. If the guard and the

spring are not operating properly, they

must be serviced before use. The guard

may operate sluggishly due to damaged

parts, gummy deposits, or a build-up of

debris.

–Assure that the base plate of the saw will

not shift while performing a "plunge cut".

Blade shifting sideways will cause binding

and likely kick back.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool TS 55 FEQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool TS 55 FEQ Manual

Product: