778820
9
Zoom out
Zoom in
Previous page
1/115
Next page
battery to explode or flammable liquids or
gases to leak from the battery.
2.2 If a battery has been damaged
Do not use the machine if the battery is
damaged or has been modified. Stop using
the machine immediately if you notice
anything unusual about the battery such
as odour formation or the generation of
heat. Batteries which are damaged or
which have been modified may exhibit
unpredictable behaviour which could lead
to heat and smoke, fire, explosion or injury.
Never use water to extinguish burning Li-
ion batteries! Use sand or a fire blanket.
There is a risk of vapours being released if
the battery is damaged or not used
correctly. The vapours may irritate your
airways. Seek fresh air and consult a
doctor if you feel unwell.
Fluid may leak out of the battery if it is
used incorrectly. Avoid contact with the
fluid. Rinse with water any areas which
accidentally come into contact with the
fluid. If fluid gets into the eyes, also
consult a doctor. Leaking battery fluid can
cause skin irritation or burns.
2.3 Safe handling of the machine
Do not use the machine in the rain or in
damp surroundings. Moisture in the
machine may cause a short circuit and fire.
Do not insert any nails, wire or similar into
the USB port. This could cause the tool to
short-circuit, smoke or catch fire.
Do not use the machine as a work bench or
work surface. Do not stand or sit on the
machine. This could damage the battery
and result in a fire or explosion.
Do not transport sharp, hot or damp
objects (liquids, pastes, or similar) in the
machine. Only transport objects with a
maximum weight of 5 kg (11 lbs) and do
not overfill the machine. You must be able
to close the lid without using force. This
could otherwise damage the battery and
result in a fire or explosion.
Risk of explosion due to improper battery
replacement or use of an incorrect battery
type. Only Festool customer service agents
may replace the integrated battery.
Do not dispose of the device or battery in a
fire or hot oven, and do not crush or cut
them mechanically; this may cause an
explosion. For correct disposal, see
chapter 8 .
CAUTION! The mains plug is used to
disconnect the machine from the power
supply. The socket should be located near
the machine and must be easily accessible
at all times.
Do not set the machine to a high
volume for long periods of time to prevent
potential hearing damage.
Hands and fingers must not be
located between the lid and the bottom
section when the machine is open. If the lid
falls shut, this may result in injuries to
hands and fingers.
2.4 Information on charging the machine
Only charge the machine with the original
mains adapter supplied. There is a risk of
fire when using an unsuitable mains
adapter.
Do not connect the electrical outlet
module, an alternative power source or a
high-voltage tool to the USB port. To do so
would be a fire risk. The USB port is
designed solely for charging low-voltage
tools (5 V/1 A).
Only charge the machine at a room
temperature between 0 °C and 45 °C (32 °F
and 113 °F).
3 Operation
Detailed information on operation: See the
sticker in the lid. A detailed manual is available
to download on the tool page at
www.festool.com.
4 Intended use
Transporting and storing tools and acces
sories.
Receiving and reproducing Bluetooth®
signals.
Charging smart devices via USB 2.0.
Use in a system with other Systainers.
Connection with another TOPROCK BT 20
(stereo function).
Use in a vehicle system.
English
9
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool TOPROCK BT 20 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool TOPROCK BT 20 in the language / languages: All languages as an attachment in your email.

The manual is 3.98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info