497589
13
Zoom out
Zoom in
Previous page
1/97
Next page
T 12+3, T 15+3, T 18+3
13
GB
Original operating manual
The specified illustrations appear at the be-
ginning of the Operating Instructions.
1 Symbols
2 Machine features
* not on all versions included in the scope of
delivery
3 Intended use
Cordless drills are suitable for drilling into
metal, wood, plastics and similar materials
as well as inserting and tightening screws.
The charger TRC 3 is designed for charging
the battery packs listed.
The user shall be liable for damage and
accidents resulting from non-specified
use; this also includes damage and
wear caused during industrial continu-
ous operation.
4 Technical data
1 Symbols.................................. 13
2 Machine features ...................... 13
3 Intended use ........................... 13
4 Technical data .......................... 13
5 Safety instructions.................... 14
6 Operation ................................ 15
7 Settings .................................. 16
8 Tool holder, attachments............ 16
9 Working with the machine.......... 16
10 Service and maintenance........... 17
11 Accessories.............................. 17
12 Disposal .................................. 17
13 Transport................................. 17
14 Warranty ................................. 18
15 EU Declaration of Conformity...... 18
Warning of general danger
Risk of electric shock
Read the Operating Instructions/
Notes!
Wear ear protection.
Wear protective gloves.
Do not throw in the household waste.
[1-1]
Buttons for releasing the battery pack
[1-2] Bit store
[1-3] On/Off switch
[1-4] Right/left switch
[1-5] LED lamp
[1-6] Gear switch
[1-7] Drilling symbol
[1-8] Screwdriving symbol
[1-9] Drilling/Fastening selector switch
[1-10] Capacity display
[1-11] Belt clip*
[1-12] Torque thumbwheel
[2-1] Battery blanking plug
Cordless drill T 12+3 T 15+3 T 18+3
Motor voltage 10,8 - 12 V 14,4 - 15,6 V 18 V
Idling speed* 1st gear 0 - 450 rpm
2nd gear 0 - 1500 rpm
Max. torque Soft material (wood) 20 Nm 27 Nm 30 Nm
Hard material (metal) 34 Nm 40 Nm 45 Nm
Adjustable torque** 1./2. gear 0,5 - 8 Nm
Chuck clamping range 1,5 - 13 mm
Max. drill diameter in wood 25 mm 35 mm 45 mm
metal 14 mm 16 mm 16 mm
Tool holder in drill spindle 1/4 ’’
Weight without battery, with Centrotec 0,95 kg 1,02 kg 1,05 kg
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool T 15en3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool T 15en3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info