497588
15
Zoom out
Zoom in
Previous page
1/97
Next page
T 12+3, T 15+3, T 18+3
15
GB
machine through the air vent slits (danger
of short circuit).
– Do not charge battery packs from external
manufacturers. The charger is designed for
charging original battery packs only. Never
charge the battery packs in chargers from
external manufacturers. Otherwise there is
a danger of fire and explosion.
Protect the battery pack from exces-
sive heat or constant heat sources
such as sunlight or naked flames.
There is a risk of explosion.
Never use water to extinguish burning
LiIon battery packs,
always use sand or
a fire blanket.
5.3 Emission levels
Levels determined in accordance with EN
60745 are typically:
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K mea-
sured in accordance with EN 60745:
The emission values specified (vibration,
noise) were measured in accordance with the
test conditions stipulated in EN 60745 and
are intended for machine comparisons. They
are also used for making preliminary esti-
mates regarding vibration and noise loads
during operation.
The emission values specified refer to the
main applications for which the power tool is
used. If the electric power tool is used for
other applications, with other tools or is not
maintained sufficiently prior to operation,
however, the vibration and noise load may be
higher when the tool is used. Take into ac-
count any machine idling times and down-
times to estimate these values more accu-
rately for a specified time period. This may
significantly reduce the load during the ma-
chine operating period.
6 Operation
6.1 Changing the battery pack [2]
L
All battery packs in the BPS and BPC se-
ries can be used with the Festool cordless
drills T12+3, T15+3, T18+3. Li-ion Bat-
tery packs can also be used with a lower
voltage than that of the cordless drill.
L
When using NiMH or NiCd battery packs,
the vacant opening can be closed with the
blanking plug [2-1].
The capacity display [1-10] shows the
charge status of the battery pack. If the ca-
pacity display is flashing the battery pack is
empty. The capacity indicator does not work
with NiCd and NiMH battery packs.
6.2 Charging the battery pack [3]
L
The battery pack is immediately ready for
operation upon delivery and can be
charged at any time independently of its
charge state without shortening the ser-
vice life.
The charger TRC 3 can be used to charge all
Festool battery packs of the BPS and BPC se-
ries. The charger automatically detects the
type of the inserted battery (NiCd, NiMH or
LiIon). A microprocessor controls the charg-
ing process in line with the charging state,
temperature and voltage of the battery pack.
If a warm NiMH battery pack (> 37 °C) is in-
serted, the pack is charged with a reduced
charging current and will take longer to
charge.
The LED [3-1] on the charger indicates the
respective operating status of the charger.
LED yellow - lit continuously
Charger is ready to use.
LED green - flashing quickly
Battery pack is charged to maximum capac-
ity.
LED green - flashing slowly
Battery pack is charged with reduced cur-
rent, LiIon is charged to 80 %.
Sound pressure level L
PA
= 65 dB(A)
Noise level L
WA
= 76 dB(A)
Measuring uncertainty
allowance
K = 3 dB
CAUTION
Operating noise
Damage to hearing
X
Use ear protection!
Drilling in metal a
h
< 2,5 m/s
2
K = 1,5 m/s
2
Screwing a
h
< 2,5 m/s
2
K = 1,5 m/s
2
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool T 12en3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool T 12en3 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 1,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info