778821
12
Zoom out
Zoom in
Previous page
1/51
Next page
The device is not a toy! Keep the device
away from children.
3 Intended use
Floodlight is intended for illumination of con
struction sites, work areas, garages and the
like. The electrical safety of the power source
must be safeguarded.
The device is not suitable for illuminating
rooms in residential buildings.
The user is liable for improper or non-in
tended use.
NOTE Some states have additional regu
lations for using electrical equipment on
construction sites. These national regulations
may restrict the use of the working light or im
pose additional requirements. Observe the valid
national regulations.
4 Technical data
Flood light SYSLITE DUO
Nominal voltage 220 - 240 V
Frequency 50/60 Hz
Illuminant 80 x 1,4 W Power LED
Max. power 112 Watt
Light current 8000 lm
Light color 5000 K
Color rendering index >80
Lifespan (L70) >10.000h
Weight 3,4 kg
Protection type IP 55
This tool has a light source of energy efficiency
class E.
5 Machine features
[1-1] Detachable stand, cable spool
[1-2] Luminous area
[1-3] Handle
[1-4] Wall peg, cable clam
[1-5] Mains power cable
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the ma
chine's name plate.
Observe country-specific regulations.
6.1 Switching on/off
Switching on
The device's mains plug must not be in
serted in moist environments as it does
not have the corresponding protection against
moisture.
Insert the mains plug.
The light cone appears automatically.
Switching off
Pull out the mains plug.
Wind up the mains power cable on the
base [1-1]. The cable end can be hooked
onto the provided clamp [2-1].
6.2 Temperature surveillance
When exceeding the temperature limit, the de
vice automatically reduces luminosity. If device
continually exceeds temperature limits, power
is cut off completely.
Measures for restoring luminosity:
Pull mains plug,
remove cause of overtemperature (i. e. ob
structed air vents),
reinsert mains plug.
Full luminosity is restored.
7 Setup
Always set up device with stand to keep
air vents air accessible [4-1].
Place on dry, even and stable surface. Do not
suspend device from its power cord. Electrical
hazards by overstraining the power cord may
occur. Prevent obstruction of the cooling slits
on top and bottom of the device.
Minimum distance to illuminated
surfaces and combustible materials
0,2 m.
0,2m
7.1 Set-up angle [3]
The device can be set up in three different an
gles.
English
12
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool SYSLITE DUO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool SYSLITE DUO in the language / languages: All languages as an attachment in your email.

The manual is 2.56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info