778777
25
Zoom out
Zoom in
Previous page
1/226
Next page
Connect the charging cable [1-11] to the AC charging input [1-1] and mains
outlet.
If SYS‑PST 1500 Li HP still does not charge, contact the manufacturer or
service workshop (see section 10).
8 Storage
Unplug the consumer.
Remove the charging cable [1-11]
and store it in SYS‑PST 1500 Li HP.
Activate transport mode: Set the
transport switch [1-13] to "0".
Close the Systainer lid with the T-
Loc [1-5].
Close the protective cap for the AC
charging input [1-1], the AC out
put [1-2] and the DC output compat
ible with USB‑CTM [1-6].
Do not store in a discharged state
for long periods of time. This can
lead to deep discharge and require
recommissioning by the manufac
turer.
Check the state of charge at least
every three months and charge if
necessary.
Store in an environment with low
humidity and at a temperature be
tween 0 °C and 23 °C.
9 Transportation
The Li-ion batteries included are sub
ject to the requirements of the legisla
tion on hazardous goods. The user must
familiarise themselves with the local
regulations prior to transport. Special
requirements apply to shipping via third
parties (e.g. air transport or haulage)
and these must be observed. When pre
paring the item to be sent, a hazardous
goods expert must be consulted. Only
dispatch the machine if the battery is
undamaged. Observe local regulations
when shipping. Observe any further na
tional regulations.
Unplug the consumer.
Remove the charging cable [1-11].
Open the Systainer lid with the T-
Loc [1-5].
Activate transport mode: Set the
transport switch [1-13] to "0".
Modules are electrically separated from
each other.
Store the charging cable [1-11]
in SYS‑PST 1500 Li HP.
Close the Systainer lid with the T-
Loc [1-5].
Only transport SYS‑PST 1500 Li HP
using the carrying handle [1-4].
The SYS‑PST 1500 Li HP can be trans
ported on the road without additional
supports.
English
25
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool SYS-PST 1500 Li HP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool SYS-PST 1500 Li HP in the language / languages: All languages as an attachment in your email.

The manual is 2.82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info