573126

Festool SYM70E Manual

16
Zoom out
Zoom in
Previous page
1/79
Next page
16
To ensure constant air circulation, always keep the
cooling-air openings in the motor housing clean
and free of blockages.
The machine is equipped with self-disconnecting
special carbon brushes. If they are worn, power is
interrupted automatically and the machine comes
to a standstill.
• Clean the tabletop insert [1.9] regularly and re-
move wood chips, dust deposits and workpiece
offcuts from the extraction channel on the chip
defl ector (see Fig. 6).
9.1 Replacing table insert
Never work with a worn table insert (1.9) but
replace it with a new one. To do this, release the
fi ve screws used to fasten the table insert on the
saw table.
A new table insert is supplied without a saw slot.
You will therefore fi rst have to saw a slot follow-
ing installation.
9.2 Adjusting the saw unit
The swivelling range of the saw unit can be read-
justed using the screw (6.2). This may be neces-
sary if the diameter of the saw blade alters during
sharpening or if a new saw blade is fi tted.
– Set the sliding fence (6.4) to 0°.
– Release the lock nut (6.1).
– Swivel the saw unit downwards until it reaches
the fence.
– Adjust the saw unit by turning the screw (6.2) as
shown in illustration 7 (turn to the left - saw unit
is lowered; turn to the right - saw unit is raised).
The saw unit must not be set so deep that
it can saw into the saw table.
– Tighten the lock nut again.
10 Accessories
Use only original Festool accessories and Festool
consumable material designed for this machine
because these components are designed spe-
cifi cally for the machine. Using accessories and
consumable material from other suppliers will
most likely affect the quality of your working
results and limit any warranty claims. Machine
wear or your own personal workload may increase
depending on the application. Protect yourself and
your machine, and preserve your warranty claims
by always using original Festool accessories and
Festool consumable material!
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet under www.festool.com.
11 Disposal
Do not throw the power tool in your household
waste! Dispose of machines, accessories and
packaging at an environmentally-responsible
recycling centre. Observe the valid national regu-
lations.
EU only: In accordance with European Directive on
waste electrical and electronic equipment and im-
plementation in national law, used electric power
tools must be collected separately and handed in
for environmentally friendly recycling.
Information on REACh:
www.festool.com/reach
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool SYM70E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool SYM70E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info