390250
10
Zoom out
Zoom in
Previous page
1/62
Next page
10
Symbols
Warning of general danger
Wear a dust mask!
Wear protective goggles!
Wear ear protection!
Read the Operating Instructions/Notes!
1 Intended use
As specifi ed, the machines are designed for sand-
ing wood, plastic, metal, composite materials,
paint/varnish, fi ller and similar materials.
Materials containing asbestos must not be proc-
essed.
For reasons of electrical safety the machine must
not be damp nor operated in a humid environment.
The machine may only be used for dry sanding.
The user is liable for damage and injury
resulting from incorrect usage!
2 Safety instructions
2.1 General Safety
WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fi re
and/or serious injury.
Save all warnings and instructions for future
reference.
The term „power tool“ in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Tool-specifi c safety rules
Always wear protective goggles because
of possible dangers when sanding.
- The manufacturer’s handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
- Harmful/toxic dusts can occur during your work
(e.g. lead-containing paint, some types of wood
and metal). Contact with these dusts, espe-
cially inhaling them, can represent a hazard for
operating personnel or persons in the vicinity.
Comply with the safety regulations that apply in
your country. Connect the electric power tool to
a suitable extraction system.
To protect your health, wear a P2 protec-
tive mask.
2.3 Noise and vibration information
The typical values determined in accordance with
EN 60745 are:
Sound-pressure level 77 dB(A)
Sound-power level 88 dB(A)
Measuring uncertainty allowance K = 3 dB
Wear ear protection!
Overall vibration levels (vector sum for three direc-
tions) measured in accordance with EN 60745:
Vibration emission level
(3 directions) a
h
= 4,0 m/s
2
Additional handle a
h
= 5,5 m/s
2
Uncertainty K = 2,0 m/s
2
The emission values specifi ed (vibration, noise)
were measured in accordance with the test condi-
tions stipulated in EN 60745 and are intended for
machine comparisons. They are also used for mak-
ing preliminary estimates regarding vibration and
noise loads during operation. The emission values
specifi ed refer to the main applications for which
Orbital sander
Technical data RS 200 EQ RS 200 Q
Power 330 W 330 W
Speed 4 000-10 000 rpm 10 000 rpm
Working strokes 8 000-20 000 rpm 20 000 rpm
Sanding stroke 2.4 mm 2.4 mm
Sanding shoe 115 x 225 mm 115 x 225 mm
Weight (excluding cable) 2.5 kg 2.5 kg
Degree of protection
/II /II
The specifi ed illustrations can be found at the beginning of the operating instructions.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool rs 200 q at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool rs 200 q in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info