796183
17
Zoom out
Zoom in
Previous page
1/129
Next page
Contents
1 Symbols.....................................................17
2 Safety warnings.........................................17
3 Intended use..............................................20
4 Technical data........................................... 20
5 Parts of the device.....................................21
6 Commissioning..........................................21
7 Working with the electric power tool........23
8 Service and maintenance..........................23
9 Storage...................................................... 24
10 Accessories............................................... 24
11 Environment..............................................24
12 General information..................................24
1 Symbols
Warning of general danger
Warning of electric shock
Read the operating instructions and
safety instructions.
Wear protective goggles and ear pro
tection.
Wear a dust mask.
Wear protective gloves when changing
tools!
Always operate with two hands.
Pull out the mains plug
Safety class II
CE marking: Confirms the conformity
of the power tool with the European
Community directives.
UKCA marking: Confirms the conform
ity of the product with UK regulations.
Direction of rotation of the grinding
wheel
Do not dispose of it with domestic
waste.
Tool contains a chip which stores data.
See section 12.1
Tip or advice
Handling instruction
2 Safety warnings
2.1 General power tool safety warnings
WARNING! Read all safety warnings, in
structions, illustrations and specifica
tions provided with this power tool. Failure to
follow all instructions listed below may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for future
reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
2.2 Safety instructions for grinding
This power tool is intended to function as a
grinder. Read all safety warnings, instruc
tions, illustrations and specifications pro
vided with this power tool. Failure to fol
low all instructions listed below may result
in electric shock, fire and/or serious injury.
Operations such as sanding, wire brush
ing, polishing, hole cutting or cutting-off
are not to be performed with this power
tool. Operations for which the power tool
was not designed may create a hazard and
cause personal injury.
Do not convert this power tool to operate
in a way which is not specifically designed
and specified by the tool manufacturer.
Such a conversion may result in a loss of
control and cause serious personal injury
Do not use accessories which are not spe
cifically designed and specified by the tool
manufacturer. Just because the accessory
can be attached to your power tool, it does
not assure safe operation.
The rated speed of the accessory must be
at least equal to the maximum speed
marked on the power tool. Accessories
running faster than their rated speed can
break and fly apart.
The outside diameter and the thickness of
your accessory must be within the capaci
ty rating of your power tool. Incorrectly
sized accessories cannot be adequately
guarded or controlled.
The dimensions of the accessory mounting
must fit the dimensions of the mounting
hardware of the power tool. Accessories
that do not match the mounting hardware
of the power tool will run out of balance, vi
English
17
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool RG 130 ECI at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool RG 130 ECI in the language / languages: All languages as an attachment in your email.

The manual is 2.9 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info