Manual Festool RAS 180.03 E-HR (page 14 of 86) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499142

Zoom out

Zoom in

1/86

Safety Warnings Speciﬁ c for Wire Brushing Op-

erations

- Be aware that wire bristles are thrown by the

brush even during ordinary operation. Do not

overstress the wires by applying excessive

load to the brush. The wire bristles can easily

penetrate light clothing and/or skin.

- If the use of a guard is recommended for wire

brushing, do not allow any interference of the

wire wheel or brush with the guard. Wire wheel

or brush may expand in diameter due to work

load and centrifugal forces.

5.3 Emission levels

Levels determined in accordance with EN 60745

are typically:

Sound pressure level 84 dB(A)

Noise level 95 dB(A)

Measuring uncertainty allowance K = 3 dB

WARNING

The noise produced during work may damage

your hearing.

Always use ear protection. f

Overall vibration levels a

(vector sum for three

directions) measured in accordance with EN

60745:

Handle a

= 6,0 m/s²

K = 2,0 m/s²

Auxiliary handle a

= 7,5 m/s²

K = 2,0 m/s²

The emission values speciﬁ ed (vibration, noise)

were measured in accordance with the test con-

ditions stipulated in EN 60745 and are intended

for machine comparisons. They are also used for

making preliminary estimates regarding vibration

and noise loads during operation.

The emission values speciﬁ ed refer to the main

applications for which the power tool is used. If

the electric power tool is used for other applica-

tions, with other tools or is not maintained suf-

ﬁ ciently prior to operation, however, the vibration

and noise load may be higher when the tool is

used. Take into account any machine idling times

and downtimes to estimate these values more

accurately for a speciﬁ ed time period. This may

signiﬁ cantly reduce the load during the machine

operating period.

6 Commissioning

WARNING

Risk of accident if the machine is operated us-

ing unauthorised voltages or frequencies.

- The mains voltage and the frequency of the

power source must correspond with the speci-

ﬁ cations on the machine’s name plate.

- In North America, only Festool machines with

a voltage speciﬁ cation of 120 V/60 Hz may be

used.

The tool is ﬁ tted with an on/off switch [1-1] with

switch-on lock [1-2]. Press the switch-on lock

to release the switch. Pressing and holding the

switch-on lock brieﬂ y after the machine starts

locks the switch while the motor is running. The

motor switches off when you press the on/off

switch again.

7 Machine settings

WARNING

Risk of accident, electric shock

Always pull the plug out of the socket be- f

fore performing any type of work on the ma-

chine.

7.1 Electronics

The machine features full-wave electronics with

the following features:

Smooth start-up

The electronically controlled smooth start-up en-

sures that the machine starts up jolt-free.

Speed control

You can regulate the rotational speed steplessly

between 800 and 4000 rpm using the adjusting

wheel [1-4].

The following table serves as a guideline to help

you select the best electronics setting for the

working material. The transition between each

speed setting is smooth.

Processed material

Working procedure

Electronics

setting

Rustic texture

on wood (LD 85) 3 - 5

Brushing

wood (KB 80) 2 - 3

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool RAS 180.03 E-HR in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool RAS 180.03 E-HR Manual

Product: