Manual Festool QUADRILL PD 20.4 E (page 14 of 75) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

574955

Zoom out

Zoom in

1/75

Q U A D R I L L

8.3 Angle attachment [5]

The angle attachment (partly as an accessory) al-

lows the user to drill and fasten at right angles to

the machine.



Prior to initial use:

apply some multi-purpose

grease to the drill spindle and the gearbox neck.

8.4 Depth stop [6]

The depth stop (partly as an accessory) allows the

user to insert screws to a predefined depth. You can

set the dimension by which the screw head pro-

trudes above or is recessed below the surface of the

workpiece.

Depth setting

Turn the housing

[6-1]

to set the

desired fastening depth. Each

detent position changes the fas-

tening depth by 0.1 mm.

Sleeve A/B must be removed before a screw can be

unscrewed.

8.5 Tool holder in the drill spindle [7]

Bits can be inserted directly into the hexagon sock-

et holder of the drill spindle.

9 Working with the machine

Please observe all mentioned safety infor-

mations and the following rules when work-

ing:

– Only use tools designed for the specified maxi-

mum speed.

– Only sharp tools ensure efficient drilling and pre-

vent machine overload.

– Always use faultless, sharpened HSS drill bits

(HSS: High Speed Steel) when drilling into metal.

– Do not cause the machine to seize through over-

– Always switch off the machine before placing on

the nut/screw.

– Caution: when inserting long screws, there is a

risk the bit may slip from the screw head and

cause injury.

– Machine vice: clamp the workpiece securely in a

machine vice, for example, before drilling to pre-

vent the workpiece from turning and causing ac-

cidents.

9.1 Bit depot [1-1]

Magnetic, for storing bits and bit holders.

9.2 Belt clip [1-9]

The belt clip (right/left) allows the user to attach

the machine briefly to work clothing.

9.3 Lighting

ON: Press the LED light switch

[1-3]

OFF: Press the LED light switch

[1-3]

again.



The light remains switched on for approx. 20 s

after the machine is disconnected from the

mains power.

9.4 Warning signals

Acoustic warning signal

An acoustic warning signal sounds and the ma-

chine switches off in the following operating states:

Visual warning signal

A visual warning signal is issued and the machine

switches off in the following operating states:

10 Service and maintenance

Customer service and repair

only

through manufacturer or service

workshops: Please find the nearest

address at:

www.festool.com/Service

Use only original Festool spare parts!

Order No. at:

www.festool.com/Service

To ensure constant air circulation, al-

ways keep the cooling air openings in

the motor housing clean and free of blockages.

Machine overloaded.

LED

[1-3]

Red - flashing

Machine has overheated.

Press the Speed set button

[1-

to switch the machine to

recovery mode.

Do not place

under load

! The machine

reverts to normal operating

mode once the machine has

cooled, if the Speed set button

or on/off switch are pressed or

the machine is placed under

load.

WARNING

Risk of injury, electric shock



Always disconnect the mains plug from the

socket before performing maintenance work on

the machine!



All maintenance and repair work which requires

the motor housing to be opened must only be

carried out by an authorised service workshop.

peep peep peep

EKAT

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool QUADRILL PD 20.4 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool QUADRILL PD 20.4 E Manual

Product: