574954
13
Zoom out
Zoom in
Previous page
1/75
Next page
Q U A D R I L L
13
GB
a hazard, have them replaced by an authorised
after-sales service workshop.
Always guide the cable backwards away from the
machine.
Take care when drilling into walls as there is a
danger of rupturing concealed gas/water pipes
or cutting through power cables.
Only for AS/NZS:
The tool shall always be sup-
plied via residual current device with a rated re-
sidual current of 30 mA or less.
6Operation
6.1 Switch on/off
On/off switch [1-7]
Press = ON, release = OFF
The speed of the machine depends on how far
the on/off switch is pressed in.
Speed set button[1-4]
Press once = ON, press twice or press on/off switch
= OFF
6.2 Attaching the additional handle[2]
Always use the additional handle.
Position the additional handle
[2-2]
on the ex-
tension of the gearbox housing and engage the
recesses on the additional handle in the lugs on
the housing.
Turn the handle until secured in position.
Turn the handle to adjust the position in 30° in-
crements.
The drilling depth can be adjusted using the
depth stop
[2-1]
.
7 Settings
7.1 Changing the rotational direction[1-8]
Switch to the left = clockwise
Switch to the right = anticlockwise
7.2 Changing gear[1-6]
Only press the speed switch when the ma-
chine is off. Otherwise there is a danger of
damaging the gearbox.
7.3 Selecting the operating mode (only PD
20/4 E)
Fastening / Drilling
Set the selector switch
[1-5]
to the drill bit
symbol.
When fastening
, always remember to work
in 1st gear and at low speeds.
Impact drilling
Set the selector switch
[1-5]
to the hammer
symbol.
The machine was designed for impact drilling
into tiles, masonry and stone.
8 Tool holder, attachments
8.1 CENTROTEC tool chuck [3]
Quick change of tools with CENTROTEC shaft
Only clamp CENTROTEC tools in CENTRO-
TEC tool chucks.
Wear gloves when replacing!
8.2 Chuck [4]
The drill chuck retains the drill or screwdriver bit.
Before initial use:
apply a coat of multi-purpose
grease to the drill spindle.
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
WARNING
Risk of injury, electric shock
Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
WARNING
Risk of injury, electric shock
Always pull the mains plug out of the socket be-
fore performing any type of work on the ma-
chine!
CAUTION
Risk of injury
Clamp the tool centrally in the drill chuck!
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool QUADRILL DR 18.4 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool QUADRILL DR 18.4 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 9,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info