573110
16
Zoom out
Zoom in
Previous page
1/132
Next page
16
CARVEX
GB
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
Hold power tool by insulated gripping
surface, when performing an operation
where the cutting accessory may con-
tact hidden wiring.
Cutting accessory con-
tacting "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, sensory
or mental ability or without sufficient
experience and/or knowledge, unless
they are supervised by a person respon-
sible for their safety or have been in-
structed on how the charger or power
tool is to be used.
Children should always be
supervised to ensure that they do not play
with the charger or the power tools.
Festool electric power tools must only be
installed on work tables provided by Fes-
tool for this purpose.
If the tool is installed in
another, or self-made, work table, it can be-
come unstable and result in serious accidents.
Wait until the power tool stops com-
pletely until placing it down.
The tool can
become entangled and lead to a loss of con-
trol of the power tool.
Do not open the battery pack or the charger. Even
after disconnection from the mains, there is still a
high capacitor voltage inside the charger.
Make sure that metal objects (such as metal
chips) or fluids do not collect in the battery pack
retaining slots or enter the machine through the
air vent slits (danger of short circuit).
Do not charge battery packs from external
manufacturers. The charger is designed for
charging original battery packs only. Never
charge the battery packs in chargers from
external manufacturers. Otherwise there is a
danger of fire and explosion.
Protect the battery pack from excessive heat
or constant heat sources such as sunlight or
naked flames. There is a risk of explosion.
Never use water to extinguish burning LiIon
battery packs, always use sand or a fire blanket.
Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
Always place the pendulum jigsaw on the
workpiece with the saw blade running.
Wear suitable protection such as ear pro-
tection, safety goggles, a dust mask for
Charger TRC 3
Mains voltage (input) 220 - 240 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 7.2 - 18 V=
Rapid charging max. 3 A
Conservation charging current, pulsating (only NiCd, NiHM) approx. 0.06 A
Charging times for LiIon 1.3 Ah/ 2.6 Ah, 80 % approx. 22/ 45 min
LiIon 1.3 Ah/ 2.6 Ah, 100 % approx. 35/ 70 min
Permitted charging temperature range -5 °C to +45 °C
Temperature monitoring via NTC resistor
Battery pack BPS 12 Li BPC 12 Li BPS 15 Li BPC 15 Li BPS 18 Li
Voltage 10.8 V 10,8 V 14.4 V 14,4 V 18 V
Capacity 1.3 Ah 1,5 Ah 2.6 Ah 3,0 Ah 2.6 Ah/ 3,0 Ah
Weight 0.49 kg 0.30 kg 0.58 kg 0.55 kg 0.67 kg
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool PSBC400EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool PSBC400EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info