497995
16
Zoom out
Zoom in
Previous page
1/132
Next page
16
C A R V E X
GB
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings
and all instructions.
Failure to follow
the warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
5.2 Machine-related safety instruc-
tions
Hold power tool by insulated gripping
surface, when performing an operation
where the cutting accessory may con-
tact hidden wiring.
Cutting accessory con-
tacting "live" wire may make exposed metal
parts of the power tool "live" and could give
the operator an electric shock.
The charger and power tool are not in-
tended for use by persons (including
children) with limited physical, sensory
or mental ability or without sufficient
experience and/or knowledge, unless
they are supervised by a person re-
sponsible for their safety or have been
instructed on how the charger or power
tool is to be used.
Children should always
be supervised to ensure that they do not
play with the charger or the power tools.
Festool electric power tools must only
be installed on work tables provided by
Festool for this purpose.
If the tool is in-
stalled in another, or self-made, work table,
it can become unstable and result in serious
accidents.
Wait until the power tool stops com-
pletely until placing it down.
The tool can
become entangled and lead to a loss of con-
trol of the power tool.
Do not open the battery pack or the charger.
Even after disconnection from the mains,
there is still a high capacitor voltage inside
the charger.
Make sure that metal objects (such as metal
chips) or fluids do not enter the machine
through the battery pack retaining slots
(danger of short circuit).
Do not charge battery packs from other
manufacturers. The charger is designed for
charging original battery packs only. Never
charge the battery packs in chargers from
other manufacturers. Otherwise there is a
danger of fire and explosion.
Protect the battery pack from excessive
heat or constant heat sources such as
sunlight or naked flames.
There is a risk
of explosion.
Never use water to extinguish burning
li-ion battery packs, always use sand
or
a fire blanket.
Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
Always place the pendulum jigsaw on the
workpiece with the saw blade running.
Charger TRC 3
Mains voltage (input) 220 - 240 V ~
Mains frequency 50/60 Hz
Charging voltage (output) 7.2 - 18 V=
Rapid charging max. 3 A
Conservation charging current, pulsating (only NiCd, NiHM) approx. 0.06 A
Charging times for LiIon 1.5 Ah/ 3.0 Ah, 80 % approx. 25/ 55 min
LiIon 1.5 Ah/ 3.0 Ah, 100 % approx. 35/ 70 min
Permitted charging temperature range -5 °C to +45 °C
Temperature monitoring via NTC resistor
Battery pack BPS 15 Li BPC 15 Li BPC 18 Li
Voltage 14,4 V 14.4 V 18 V
Capacity 2,6 Ah 3.0 Ah 2,6 Ah/ 3.0 Ah
Weight 0,58 kg 0,55 kg 0,67 kg
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool PSBC CARVEX 420 EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool PSBC CARVEX 420 EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 12,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info