382552

Festool ps 300 Manual

13
Zoom out
Zoom in
Previous page
1/86
Next page
TRION
13
GB
tion where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory contacting a "live" wire
may make exposed metal parts of the pow-
er tool "live" and could give the operator an
electric shock.
–
Festool electric power tools must only
be installed on work tables provided
by Festool for this purpose.
If the tool is
installed in another, or self-made, work ta-
ble, it can become unstable and result in
serious accidents.
–
Wait until the power tool stops com-
pletely until placing it down.
The tool
can become entangled and lead to a loss of
control of the power tool.
– Deformed or cracked saw blades and saw
blades with blunt or broken cutting edges
must not be used.
– Always place the pendulum jigsaw on the
workpiece with the saw blade running.
– Wear suitable protection such as ear pro-
tection, safety goggles, a dust mask for
work which generates dust, and protective
gloves when working with raw materials
and when changing tools.
– Always secure the workpiece in such a
manner that it cannot move while being
sawed.
– Always connect the machine to a dust ex-
tractor when work involves dust genera-
tion.
– Check the plug and the cable regularly and
should either become damaged, have
them replaced by an authorised after-sales
service workshop.
4.3 Metalworking
The following precautions are to be
taken when processing metals for
safety reasons:
– Pre-connect a residual current circuit-
breaker (FI, PRCD).
– Connect the machine to a suitable dust ex-
tractor.
– Clean tool regularly of dust accumulations
in the motor housing.
5 Emission levels
The typical values determined in accordance
with EN 60745 are:
Vibration emission value a
h
(vector sum for
three directions) and uncertainty K mea-
sured in accordance with EN 60745:
The emission values specified (vibration,
noise) were measured in accordance with the
test conditions stipulated in EN 60745 and
are intended for machine comparisons. They
are also used for making preliminary esti-
mates regarding vibration and noise loads
during operation.
The emission values specified refer to the
main applications for which the power tool is
used. If the electric power tool is used for
other applications, with other tools or is not
maintained sufficiently prior to operation,
however, the vibration and noise load may be
higher when the tool is used. Take into ac-
Wear protective goggles.
PS 300 Q, PSB 300 Q
Sound-pressure leve L
PA
= 86 dB(A)
Sound-power level L
WA
= 97 dB(A)
Measuring uncertainty
allowance
K = 3 dB
PS 300 EQ, PSB 300 EQ
Sound-pressure leve L
PA
= 83 dB(A)
Sound-power level L
WA
= 94 dB(A)
Measuring uncertainty
allowance
K = 3 dB
CAUTION
Operating noise
Damage to hearing
X
Wear ear protection!
Sawing wood
Handle (PS 300 Q, PSB 300
Q, PS 300 EQ, PSB 300 EQ)
a
h
= 4.5 m/s
2
K = 2.0 m/s
2
Gear head (PS 300 Q, PS
300 EQ)
a
h
= 7.0 m/s
2
K = 2.0 m/s
2
Sawing metal
Handle (PS 300 Q, PSB 300
Q, PS 300 EQ, PSB 300 EQ)
a
h
= 3.0 m/s
2
K = 2.0 m/s
2
Gear head (PS 300 Q, PS
300 EQ)
a
h
= 5.0 m/s
2
K = 2.0 m/s
2
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool ps 300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool ps 300 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian as an attachment in your email.

The manual is 1,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info