499926
12
Zoom out
Zoom in
Previous page
1/70
Next page
12
tool is idle, prior to maintenance and when
changing tools such as saw blades, drill bits,
cutting tools.
Remember to remove keys. n. Check that the
key and adjustment tools have been removed
before switching the tool on.
Avoid unintentional starting. o. Do not carry a
pneumatic tool that is connected to a com-
pressed-air supply with your fi nger on the
trigger. When connecting the compressed-air
hose to a compressed-air supply, make sure
that the switch is not activated.
Stay alert. p. Keep your eyes on your work. Use
common sense. Do not use the pneumatic tool
if you are not able to concentrate properly.
Operating and maintenance personnel must
be physically strong enough to handle the size,
weight and power of the machine.
Check the pneumatic tool for possible damage. q.
Before continuing to use the pneumatic tool,
carefully examine safety devices and slightly
damaged components and make sure that they
function correctly and as specifi ed.
Check whether moving components function
correctly and do not seize, and whether any
components are damaged.
All components must be fi tted correctly and
meet all requirements to ensure that the
pneumatic tool operates correctly.
Damaged safety devices and parts should be
repaired or replaced by an authorised service
centre unless otherwise specifi ed in the oper-
ating instructions. Damaged switches must be
replaced by an authorised service centre.
Do not use pneumatic tools with faulty switch-
es (machine cannot be switched on or off).
Caution! r. Only use accessories and auxiliary
devices that are listed in the operating manual
or that are recommended by the manufacturer
(catalogue).
Using other tools or accessories can pose a
risk of injury.
Have your pneumatic tool repaired by a s.
qualifi ed specialist. This pneumatic tool cor-
responds to the relevant safety regulations.
Repairs should only be carried out by a quali-
ed specialist. The operator is otherwise at
risk of an accident.
Only trained and qualifi ed persons are permit-t.
ted to set up, adjust and operate this air tool.
Persons without the relevant qualifi cations and
training are more likely to cause accidents.
This air tool may not be modifi ed. u. Modifi ca-
tions may reduce the effectiveness of safety
devices and pose a greater risk to operating
personnel.
Hold the machine correctly. v. Prepare to coun-
teract normal or sudden movements - hold the
machine with both hands.
2.2 Machine-related safety instructions
- The manufacturer’s handling and processing
instructions must be observed without fail if
explosive or self-igniting dusts are likely to oc-
cur during sanding.
- If dust dangerous to health is produced during
sanding, the machine should be connected to
an appropriate extraction device and the safety
regulations that apply to the working material
should be observed.
- The operating pressure should not exceed 6.5 bar.
- The machine should only be operated with
sandpaper. Grinding wheels and parting grinder
discs are not permitted.
- Only work with correctly processed com-
pressed air. Using the Festool service unit VE
guarantees this.
- Only use original Festool accessories.
- Wear suitable protection such as ear protection,
safety goggles, a dust mask for work which gen-
erates dust, and protective gloves when working
with raw materials and when changing tools.
- The permissible rotational speed of the acces-
sory must be at least as high as the maximum
speed specifi ed on the machine. Accessories
that rotate faster than the permissible level can
rupture.
- Proceed with caution in unfamiliar surround-
ings that may contain electricity or other supply
cables that harbour hidden dangers. Make sure
that there are no electrical cables, gas pipelines
or similar that, if damaged, could pose a hazard
when the machine is used.
2.3 Residual risks
In spite of compliance with all relevant design
regulations, dangers may still present them-
selves when the machine is operated, e.g.:
• Workpiece parts being thrown off,
• Parts of damaged tools being thrown off,
• Noise emission,
• Sawdust emission.
3 Noise and vibration information
The typical values determined in accordance with
EN ISO 15744are:
Sound pressure level 80 dB(A)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool LRS 400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool LRS 400 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info