778808
14
Zoom out
Zoom in
Previous page
1/110
Next page
14
LHS-E 225
GB
Original operating manual
1Symbols
2 Safety instructions
2.1 General safety instructions
WARNING!
Read all safety warnings, in-
structions, illustrations and specifications
provided with this power tool.
Failure to follow all
instructions listed below may result in electric
shock, fire and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
2.2 Machine-related safety instructions
General safety instructions for sanding:
a.
This power tool is designed to be used as a
sander with sandpaper. Read all safety instruc-
tions, information, illustrations and technical
data enclosed with the machine.
If the following
instructions are not observed, this may lead to
electrical shock, fire and/or serious injuries.
b.
This power tool is not suitable for coarse sand-
ing, sanding with a wire brush, abrasive cutting
or polishing.
Applications for which the power
tool is not intended can pose a serious risk and
cause injuries.
c.
Do not use any accessories that the manufactur-
er has not specially designed or recommended
for this power tool.
Just because you can attach
accessories to your power tool does not guaran-
tee that they can be used safely.
d.
The permissible speed of the insertion tool
must be at least the maximum speed specified
on the tool itself.
Accessories that rotate faster
than the permitted speed can break and fly off.
e.
The outer diameter and thickness of the inser-
tion tool must correspond to the dimensions of
your power tool.
Insertion tools which are mea-
sured incorrectly cannot be sufficiently shielded
or controlled.
f.
Sanding discs, flanges, sanding pads and other
accessories must be fully compatible with the
rotary spindle on your power tool.
Insertion
tools which are not fully compatible with the ro-
tary spindle on the power tool will rotate uneven-
ly, vibrate strongly and may lead to a loss of
control.
g.
Do not use insertion tools that are damaged.
Before each use, check insertion tools such as
sanding discs for chipping and cracks and sand-
ing pads for cracks, wear or heavy abrasive
wear. If the power tool or insertion tool is
dropped, check whether it is damaged.
Dam-
aged insertion tools will generally break after a
short time.
h.
Make sure that any other persons in the vicinity
are at a safe distance from your work area. Any-
one entering the work area must wear personal
protective equipment.
Fragments of the work-
piece may fly off and even cause injuries outside
the immediate work area.
i.
Keep the mains cable away from rotating inser-
tion tools.
If you lose control of the machine, the
mains cable may be severed or caught and your
hand or arm could get caught in the rotating in-
sertion tool.
j.
Never place the power tool down before the in-
sertion tool has come to a complete halt.
The ro-
tating insertion tool may make contact with the
storage area, which could cause you to lose con-
trol of the power tool.
k.
Do not leave the power tool running when you
are carrying it.
Your clothing may accidentally
come into contact with and get caught in the ro-
tating insertion tool.
l.
Clean the vents in your power tool on a regular
basis.
The fan draws dust into the housing and a
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Disconnect from the power supply!
Do not dispose of as domestic waste.
Tip or advice
Handling instruction
Safety class II
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool LHS-E 225 EQ Planex Easy at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool LHS-E 225 EQ Planex Easy in the language / languages: All languages as an attachment in your email.

The manual is 12.49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info