499936

Festool LEX 3 2 5 Manual

15
Zoom out
Zoom in
Previous page
1/101
Next page
LEX 3
15
GB
ings that may contain electrical or other sup-
ply cables that harbour hidden dangers.
Ensure that there are no electrical cables, gas
pipelines or similar that, if damaged, could
pose a hazard when the machine is used.
Hazard as a result of dust and vapours
– If hazardous dust is produced during sand-
ing, the machine should be connected to an
appropriate extractor and the safety regula-
tions that apply to the working material
should be observed.
– A risk assessment in relation to this hazard
must be carried out and corresponding con-
trol mechanisms implemented. Arising dust
must be factored in.
– Connect the dust extractor. Make sure that
available dust extraction equipment is con-
nected and used correctly. Observe the re-
gional safety regulations for hazardous dusts
and vapours. Operate and service the com-
pressed air tool as described in the recom-
mendations included in these instructions
and use accessories and attachments from
Festool to minimise the release of dust and
vapours into the atmosphere. In dusty envi-
ronments, make sure that the dissipation of
exhaust air does not disturb the dust.
– If necessary arising dust or vapours must be
controlled at the place of their release.
– All components must be fitted correctly and
meet all requirements to ensure that the
compressed air tool operates correctly.
– Select, maintain and replace accessories and
consumables according to these operating in-
structions.
– Wear a dust mask. Observe instructions from
the employer or occupational and health reg-
ulations.
Noise hazard
– Higher noise level can lead to permanent
hearing damage, loss of hearing or other
problems if inadequate hearing protection is
not worn or available.
– A risk assessment in relation to this hazard
must be carried out and corresponding con-
trol mechanisms implemented, e.g. the use
of insulating materials.
– Wear ear protection. Observe instructions
from the employer or occupational and health
regulations.
– Operate and maintain compressed air tool
according to these operating instructions.
– Select, maintain and replace accessories and
consumables according to these operating in-
structions.
– Assure function of the silencer at the com-
pressed air tool.
Vibration hazard
– Vibrations can cause damage to nerves and
problems with blood circulation in hands and
arms.
– When working in cold environments wear
warm clothing and keep hands warm and dry.
– In the event of numbness, tingling or pains in
fingers or hands or white colouration of the
fingers or hands, cease work, inform employ-
er and consult a doctor.
– Operate and maintain compressed air tool
according to these operating instructions.
– Do not hold the compressed air tool too tight,
but with a secure grip while observing the
necessary hand reaction forces. The vibration
risk is greater with increasing gripping
strength.
Additional safety information for pneu-
matic machines
– Compressed air can cause serious injuries.
– Disconnect the compressed air hose from
the compressed air supply. In the event
of non-use of the compressed air tool,
before maintenance and when changing
insertion tools.
– Never direct the air flow towards yourself
or other persons.
– Hoses flapping around can cause serious in-
juries. Check whether hoses and their fixing
devices have not suffered damage or become
loose.
– The operating pressure should not exceed
6.2 bar.
– Never carry the compressed air tool by the
compressed air hose.
Further safety information
–
Keep your work area tidy.
Untidiness in
the work area can cause accidents.
–
Take into consideration environmental
influences.
Do not leave compressed air
tools out in the rain.
–
. Keep away from children!
Do not allow
others to touch the compressed air tool or the
compressed air hose. Keep others away from
your work area.
–
Store your compressed air tools safely.
Unused compressed air tools should be
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool LEX 3 2 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool LEX 3 2 5 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info