574949
6
Zoom out
Zoom in
Previous page
1/34
Next page
6
Technical data Charger LC 45
Supply voltage (input) 230 - 240 V~
Line frequency 50/60 Hz
Charging voltage (output) 7.2 - 18 V=
Charging current 3 A
Quick charge max. 3 A
Compensation charge
pulsating app. 0.06 A
Charging time for
NiCd 2.0 Ah app. 45 min
NiCd 2.4 Ah app. 50 min
NiMH 3.0 Ah app. 70 min
The specifi ed illustrations can be found
at the beginning of the operating instruc-
tions.
1 Before starting up, please obser-
ve the following
1.1 Intended use
The LC 45 battery charger is designed for
recharging the battery pack listed.
The user is liable for damage and injury
resulting from incorrect usage!
1.2 Safety instructions
- Repairs may only be performed by autho-
rised technicians. LC 45 charging device:
Even after disconnection from the mains,
there is still a high capacitor voltage on
the power output component on the inside
of the device.
- Protect equipment against moisture.
- Do not use the charger if the connecting
cable is damaged.
- Protect the cable against heat, oil and
sharp edges.
- Keep the connection contacts of electro-
nic equipment, charger and battery pack
clean.
- Keep the air vents of the electronic equip-
ment and the charger clean to guarantee
the air circulation for cooling.
- No metal objects (metal chips) should
enter the charger at the contact points as
well as through the cooling slits into the
equipment (danger of short circuit).
1.3 Wall mounting LC 45
The charger LC 45 has two longitudinal slots
on its rear by which it can be suspended on
walls using two screws (e.g. button-headed
or fl at head screw with a shaft diameter of
5 mm).
Screw both screws into the wall 96 mm
apart until the screwhead is protruding from
the wall by approx. 4 mm.
2 Charge battery pack
To load the battery pack, push it into the
holder (1.1) on the charger up to the
stop.
Perform this in reverse to remove the bat-
tery pack from the charger.
The battery type used (NiCd or NiMH) is
detected automatically.
Charging is controlled by a microproces-
sor. If a warm NiMH battery pack (>37
°C) is inserted, charging will only be carried
out at a lower charge current. In this case,
the charging time is extended.
We reserve the right to make changes to
the technical data contained in this infor-
mation as a result of ongoing research and
development work.
The LED (1.2) indicates the respective char-
ging state of the charger.
LED yellow – steady
Charger is ready for use
LED green – fl ashing
Battery pack being charged.
LED green – steady
Battery pack fully charged, conservation
charge on.
LED red – fl ashing
General malfunction, e. g. full contact not
being made, short-circuit, battery pack
faulty.
LED red – steady
Temperature of battery pack is outside per-
missible limit.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool LC 45 QUICKLADER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool LC 45 QUICKLADER in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info