573124
15
Zoom out
Zoom in
Previous page
1/138
Next page
15
1 Symbols
Warning of general danger.
Read the Operating Instructions/Notes!
Danger area! Keep hands, fi ngers and
arms away from this area.
Wear protective goggles.
Wear ear protection.
Wear a dust mask.
Wear protective gloves.
Caution: laser beams!
Dispose of the machine, accessories and
packaging at an environmentally respon-
sible recycling centre.
2 Technical data
Power 1600 W
Rotational speed (idle) 1400 - 3400 rpm
Tool spindle, dia. 30 mm
Weight
KS 120 EB 21.5 kg
KS 88 E 20,7 kg
Protection class
/ II
See section 8 "Operation" for the maximum work-
piece dimensions.
The specifi ed illustrations can be found at the
beginning an at the end of the operating instruc-
tions.
Components on illustrations marked with * are
only included in the scope of delivery of the KS
120 EB.
3 Machine features
(1.1) Hand grip
(1.2) On/off switch
(1.3) Switch-on lock
(1.4) Lever for cutting depth limiter
(1.5) Rotary knob for clamping the guide fi x-
ture
(1.6) Transport safety device
(1.7) Scale for mitre cuts (vertical)
(1.8) Scale for mitre cuts (horizontal)
(1.9) Clamp lever for mitre cuts (horizontal)
(1.10) Stop lever for preset mitre cut angles
(horizontal)
(1.11) Rotary handle for fine adjustment of
mitring angle (vertical) *
(2.1) On/off switch for laser*
(2.2) Adjusting wheel for rotational speed
(2.3) Fastfi x spindle lock
(2.4) Clamping lever for stop ruler
(2.5) Release lever for special cutting posi-
tion*
(2.6) Lever for special cutting position*
(2.7) Cable holder with integral handle
(2.8) Clamp lever for mitre cuts (vertical)
(2.9) Selector switch for mitre angle range
(vertical)
* Only included in the scope of delivery of the KS
120 EB.
4 Intended use
The electric power tool is a stationary unit de-
signed for sawing blocks of wood, plastic, alu-
minium profi les and similar materials.
Do not process other materials, in particular steel,
concrete and mineral materials.
The electric power tool is designed and approved
for use by trained persons or specialists only.
The user bears the responsibility for dam-
age and accidents caused by improper
use.
Other risks
In spite of compliance with all relevant design
regulations, dangers may still present themselves
when the machine is operated, e.g.:
Workpiece parts being thrown off
Parts of damaged tools being thrown off
• Noise emission
• Dust emission
Circular cross-cut saw
KAPEX KS 120 EB/ KS 88 E
Table of contents
1 Symbols..................................................... 15
2 Technical data .......................................... 15
3 Machine features ...................................... 15
4 Intended use ............................................. 15
5 Safety instructions .................................... 16
6 Commissioning ......................................... 17
7 Adjustments ............................................. 17
8 Operation .................................................. 19
9 Service and maintenance ......................... 20
10 Disposal .................................................... 22
11 EU Declaration of Conformity ................... 22
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool KS88E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool KS88E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info