778531
24
Zoom out
Zoom in
Previous page
1/143
Next page
Cutting depth without guide rail/track
rail
max. 55 mm
+FS
Cutting depth with guide rail/track rail
max. 51 mm
7.3 Adjusting the cutting angle
The saw table must be on an even surface
when adjusting the cutting angle.
Between 0° and 50°:
Open the rotary knob [4-2].
Swivel the saw unit to the required cutting
angle [4-1].
Close the rotary knob [4-2].
Both adjustments (0° and 50°) are set at
the factory and can be readjusted by the
customer service team.
For angled cuts, the cutting depth is
smaller than the value displayed on the
cutting depth scale.
7.4 Adjust pendulum guard
CAUTION
Risk of injury! Sharp edges!
The pendulum guard swings back quickly in
the event of sudden release.
The pendulum guard [1-6] must only be
opened with the retractor lever [1-4].
7.5 Selecting the saw blade
Festool saw blades are identified by a coloured
ring. The colour of the ring represents the ma
terial for which the saw blade is suited.
WARNING! Risk of injury! Pendulum hood
mechanism not working correctly! Diamond
saw blades must not be used to saw cement-
bonded fibreboard.
Colour Material Symbol
Yellow Wood
Red Laminate, mineral ma
terial
HPL/TRESPA®
Green Plaster- and cement-
bonded chipboard and
fibreboard
Blue Aluminium, plastic
"$3:-
7.6 Changing the saw blade
WARNING
Risk of injury
Remove the battery pack from the power
tool before performing any work on the
power tool.
CAUTION
Risk of injury from hot and sharp insertion
tool
Do not use any blunt or faulty insertion
tools.
Wear protective gloves when handling an
insertion tool.
Removing the saw blade
Swivel saw to 0° position before replacing
the saw blade and set maximum cutting
depth.
Position saw on motor cover when replac
ing [5-1].
Turn the lever [5-4] as far as the stop.
Open the screw [5-8] using the Allen
key [5-3].
Hold the pendulum guard open [5-7] only
with retractor lever [5-5].
Remove the saw blade [5-9].
Inserting the saw blade
WARNING! Check the screws and flange for
contamination and only use clean and undam
aged parts.
Insert the new saw blade.
WARNING! The direction of rotation of the
saw blade [5-10] and saw [5-6] must
match. Serious injuries may occur in the
event of non-compliance.
Insert the outer flange [5-11] so that the pin
engages in the recess on the inner flange.
Release retractor lever [5-5] and allow the
pendulum guard [5-7] to swivel back to its
final position.
Tighten the screw [5-8].
Reposition the lever [5-4].
English
24
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool HKC 55 EB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool HKC 55 EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4.42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info