Manual Festool HK132 (page 22 of 114) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

573118

Zoom out

Zoom in

1/114

For this purpose, the curve-cutting attachment

swivels by up to 45°.

Set the saw to the minimal cutting depth.

Remove the saw blade [3-3] by following the in-

structions in Section 7.7 (Replacing the saw blade).

Unscrew the following components:

Plate [5-1] covering the blade guard

Guard [5-2] covering the pendulum mount

Dust extraction connection [5-3]

Riving knife [5-4]

Ensure the curve-cutting head [7-3] is clean and

ﬁ tted according to the illustration and screw it

tight. Ensure that the mounting ﬂ ange [7-1] and

the clamping ﬂ ange [7-2] are in the correct posi-

tion. The holes in the curve-cutting head [7-3] must

ﬁ t onto the follow-up pins on the mounting ﬂ ange

[7-1]. Insert the pin [7-4] into the hole on the curve-

cutting head to secure it.

Screw the cover guard [7-5] onto the pendulum

mount [7-6].

Screw the cover guard [7-7] onto the blade guard

[7-8].

Select the depth to be milled as described in Section

7.2 (Cutting Depth Adjustment) and the angle to be

milled as described in Section 7.3 (Cutting Angle

Adjustment).

You can check the curve depth against the angle to

be milled on the table on the blade guard.

10 Maintenance

WARNING

Risk of accident, electric shock

 Always pull the plug out of the socket before

performing any type of work on the machine.

 All maintenance and repair work which re-

quires the motor housing to be opened, must

only be carried out by an authorised service

workshop.

Customer service and repair. Only through

manufacturer or service workshops:

Please ﬁ nd the nearest address at: www.

festool.com/Service

EKAT

Use only original Festool spare parts! Or-

der No. at: www.festool.com/Service

- The unit should be stored in a dry place where it

is protected against freezing.

With each changing of the saw blade, re move de-

posited saw dust from the inside of the protective

guard.

- The ventilation slots on the motor casing should

be cleaned out from timxe to time.

After an operating period of approx. 200 hours, the

following maintenance work must be performed:

Check the motor brushes and replace if neces-

sary. Clean the motor housing.

- Renew the grease ﬁlling of the gear box.

11 Environment

Do not throw the power tool in your household

waste! Dispose of the machine, accessories and

packaging at an environmentally-responsible re-

cycling centre! Observe the valid national regula-

tions.

EU only: European Directive 2002/96/EC stipulate

that used electric power tools must be collected

separately and disposed of at an environmentally

responsible recycling centre.

Information on REACh:

www.festool.com/reach

12 EU Declaration of Conformity

Hand Circular Saw

Serial no.

HK 132 E 10011289

Year of CE mark: 2013

We declare under sole responsibility that this

product complies with the following norms or

normative documents:

2006/42/EC, 2004/108/EC, 2011/65/EU, EN 55014-

1, EN 55014-2, EN 60745-1, EN 60745-2-5, EN

61000-3-2, EN61000-3-3.

Festool Group GmbH & Co. KG

Wertstr. 20, D-73240 Wendlingen, Germany

Dr. Martin Zimmer

Head of Research, Development and Technical

Documentation

2013-04-15

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool HK132 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,78 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool HK132 Manual

Product: