Manual Festool HK 85 EB (page 21 of 164) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

778534

Zoom out

Zoom in

1/164

pipe can lead to an explosion. Penetration

of a water pipe can result in damage to

property.

–Wait until the power tool has come to a

complete halt before placing it down. The

insertion tool can get caught and lead to a

loss of control of the power tool.

– Do not use the machine for overhead work.

–Harmful/toxic dust may be produced dur

ing your work (e.g. paint containing lead,

certain types of wood or metals). Contact

with or inhalation of this dust may pose a

risk for the operating personnel or persons

in the vicinity. Comply with the safety regu

lations that apply in your country.

–

Wear suitable personal protective equip

ment: Ear protection, protective goggles,

dust mask for work that generates dust,

protective gloves for working with rough

materials and for changing tools.

– Wear a P2 respiratory mask to protect

your health. In enclosed spaces, ensure

that there is sufficient ventilation and con

nect a mobile dust extractor.

– Check whether there are any signs of dam

age to the housing components, such as

cracks or stress whitening. Have any dam

aged components repaired before using the

power tool.

–Only for AS/NZS: The tool shall always be

supplied via residual current device with a

rated residual current of 30 mA or less.

2.5 Residual risks

In spite of compliance with all relevant design

regulations, hazzards while operating the ma

chine still occur e.g.:

– Touching the saw blade in the area of the

front opening below the saw table,

– Touching the parts of the saw blade that

protrude below the saw table while cutting,

– Touching rotating parts from left and right

sides: saw blade, clamping flange, flange

screw.,

– Kickback of machine due to jamming in the

workpiece,

– Touching live parts when the casing is

opened and the mains plug is in the socket,

– the flying off of parts,

– the flying off of machine parts from a dam

aged machine,

– noise emission,

– dust emission.

2.6 Aluminium processing

When sawing aluminium, the following

measures must be taken for safety reasons:

– Install an upstream residual-current circuit

breaker (FIG, PRCD).

– Connect the machine to a suitable dust ex

tractor.

– Regularly remove dust deposits from the

motor housing.

– Use an aluminium saw blade.

– Close the viewing window/chipguard.

Wear protective goggles.

– When sawing panels, they must be lubrica

ted with paraffin but thin-walled profiles

(up to 3 mm) can be sawed without lubrica

tion.

2.7 Emission levels

The levels determined in accordance

with EN 62841 are typically:

Sound pressure level LPA = 92 dB(A)

Sound power level LWA = 103 dB(A)

Uncertainty K = 3 dB

CAUTION

Noise generated when working

Risk of damage to hearing

► Use ear protection.

Vibration emission level ah (vector sum for

three directions) and uncertainty K measured in

accordance with EN 62841:

Sawing wood ah = 1.5 m/s2

K = 1,5 m/s2

Sawing metal ah = 1.7 m/s2

K = 1,5 m/s2

The specified emission levels (vibration, noise)

– are used to compare machines.

– They are also used for making preliminary

estimates regarding vibration and noise

load during operation.

– They represent the primary applications of

the power tool.

English

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool HK 85 EB in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7.99 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool HK 85 EB Manual

Product: