Manual Festool ES 125 EQ (page 7 of 34) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

498088

Zoom out

Zoom in

1/34

7 Attaching sanding material

Always use original Festool sanding materials!

The appropriate Stickﬁ x sanding paper and

Stickﬁ x sanding felt can be fastened quickly and

easily onto the Stickﬁ x sanding base.

The self-adhesive sanding material (1.7) is

simply pressed onto the sanding base (1.8) and

held safely in place by the Stickﬁ x sanding base

velcro surface. After use, the StickFix sandpa-

per is simply pulled off.

8 Operating instructions

Never overload the tool by using too much

pressure!

The best sanding results are achieved when

applying moderate pressure. The sanding per-

formance and quality depend mainly on the

choice of the right sanding material. Festool

offers the appropriate accessories, sanding and

polishing attachments for every application. The

accessory and tool order number can be found

in the Festool catalogue or on the Internet un-

der ”www.festool.com”.

We recommend the following settings

on the rotary control (2.1) for electronic

machines:

rotary control setting

- sanding work

5 - 6

- sanding with max. drive

- sanding old paint

- sanding wood and veneer prior to painting

- interim sanding of paint on surfaces

4 - 5

- sanding of thinly applied primer

- sanding of wood with sanding vlies

- sanding edges on wooden parts

- smoothing primed wooden surfaces.

3 - 4

- sanding full wooden and veneer edges

- sanding in the grooves/rebates of windows

and doors

- interim paint sanding on edges

- pre-sanding natural wood windows with san-

ding vlies

- smoothing wood surfaces with sanding felt

prior to staining

- rubbing down stained surfaces with sanding

vlies

- rubbing down or removing excess lime paste

with sanding vlies

2 - 3

- interim paint sanding on stained surfaces

- cleaning natural wood window grooves with

sanding felt

1 - 2

- sanding stained edges

- sanding thermoplastic synthetics.

9 Sanding base brakes

The sanding base is braked by a collar (2.6)

in order to prevent any uncontrolled excessive

speed of the sanding base.

Because the collar wears down in the course of

time, it has to be replaced by a new one (order

no. 489 190) as soon as there is any reduction

in the braking effect.

10 Maintenance and care

Always remove the plug from the

mains supply socket before car-

rying out any work on the machi-

ne!

The cooling air vents on the motor housing

must always be free of blockages and clean to

ensure air circulation.

Any maintenance or repair work requiring the

motor housing to be opened may only be carried

out by an authorised service workshop.

11 Warranty

Our equipment is under warranty for at least 12

months with regard to material or production

faults in accordance with national legislation.

In the EU countries, the warranty period is 24

months (an invoice or delivery note is required

as proof of purchase).

Damage resulting from, in particular, normal

wear and tear, overloading, improper handling,

or caused by the user or other damage caused

by not following the operating instructions, or

any fault acknowledged at the time of purchase,

is not covered by the warranty.

Complaints will only be acknowledged if the

equipment has not been dismantled before

being sent back to the suppliers or to an au-

thorised Festool customer support workshop.

Store the operating instructions, safety notes,

spare parts list and proof of purchase in a safe

place. In addition, the manufacturer’s current

warranty conditions apply.

Note

We reserve the right to make changes to the

technical data contained in this information as

a result of ongoing research and development

work.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool ES 125 EQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool ES 125 EQ Manual

Product: