778638

Festool DWC 18-4500 - 2021 Manual

16
Zoom out
Zoom in
Previous page
1/98
Next page
► To do this, place the depth stop on the bit as
shown in figure [3b].
► The bit can be taken out by tilting the depth
stop with the bit, while pulling at the same
time.
► Then place the new bit in the bit holder.
9 Working with the machine
9.1 Switching on/off [1-2]
The tool is not started by pressing the
switch [1-2] alone – not a tool fault!
Once the screw is driven to the de
sired depth, the tool switches off au
tomatically.
There are numerous ways to switch the tool on:
a)
► Set the tool's rotational direction to clock
wise using the right/left switch [1-3].
► Move the selector switch [1-4] to the MAN
position.
► To switch the tool on, actuate the
switch [1-2] and at the same time, press on
the screw with the drill bit.
By pressing on the switch [1-2], the speed can
be infinitely adjusted.
b)
► Set the tool's rotational direction to clock
wise using the right/left switch [1-3].
► Move the selector switch [1-4] to the AUTO
position.
► To activate the tool, press on the screw with
the drill bit.
It is not necessary to press the switch [1-2].
The top speed is set automatically.
c)
► Set the tool's rotational direction to anti
clockwise using the right/left switch [1-3].
► Switch the tool on using the switch [1-2].
The MAN/AUTO selector switch [1-4] is in
either position.
By pressing on the switch [1-2], the speed can
be infinitely adjusted.
The drywall screwdriver rotates anti
clockwise by pressing on the
switch [1-2] only, without also having
to press on the bit.
To unscrew screws fully, the depth
stop does therefore not need to be re
moved.
9.2 Depth stop
Turning on the depth stop [1-5] sets the screw
ing depth, as shown in figure [4]. The setting is
accurate to approx. ± 0.1 mm.
Anticlockwise rota
tion
Screw is countersunk
further out.
Clockwise rotation Screw is countersunk
further in.
Once the depth setting is made, drive in a test
screw then, if necessary, correct the depth.
Attaching the depth stop
► Place the depth stop [3-1] on the transmis
sion housing [3-5].
► Then, apply pressure until the depth stop
audibly clicks into place.
Removing the depth stop
► Take the depth stop out of the transmission
housing by pulling firmly.
9.3 Frame hook and belt clip
The belt clip [5-1] can be used to attach the tool
to working clothes temporarily – it can be af
fixed to the left or right-hand side of the tool
using a screw [5-2], making it suitable for
right-handed and left-handed operators – see
figure [5].
The tool also has a hook [6-1], by which the tool
can be hung, as required. It can be affixed to the
left or right-hand side of the housing using the
screw [6-2] – see figure [6].
9.4 Magazine attachment
The magazine attachment enables the operator
to work continuously without unnecessary pau
ses.
Fitting the magazine attachment
► Remove the depth stop [3-1] on the bit
holder [3-2] using the bit, as described in
section 8 .
► Move the selector switch [1-4] to the MAN
position.
► Push the long bit [7-1] into the tool hold
er [3-4] until it clicks into place.
► Then affix the magazine attachment to the
transmission housing. The magazine at
tachment must audibly click into place.
► The magazine attachment can be positioned
at 30° increments.
Removing the magazine attachment
► Take the magazine attachment out of the
transmission housing by pulling firmly.
English
16
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DWC 18-4500 - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DWC 18-4500 - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 3.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info