778637
15
Zoom out
Zoom in
Previous page
1/98
Next page
Cordless drywall screwdrivers DWC 18-2500 DWC 18-4500
Max. workable screw length 55 mm 55 mm
Weight (incl. battery pack and magazine attachment)
as per EPTA procedure 01:2014
2 kg
Weight excl. battery pack 1.2 kg
Weight excl. battery pack, incl. depth stop 1.3 kg
Weight excl. battery pack, incl. magazine attachment 1.6 kg
* Speed values based on fully charged battery
pack.
5 Parts of the machine
[1-1] Bit store
[1-2] On/off switch
[1-3] Rotational direction switch
[1-4] AUTO/MAN selector switch
[1-5] Depth stop
[1-6] Bits
[1-7] Insulated gripping surfaces (grey sha
ded area)
[1-8] Capacity display button on battery pack
[1-9] Capacity display
Accessories shown or described are not always
included in the scope of delivery.
The specified illustrations appear at the begin
ning of the Operating Instructions.
6 Commissioning
6.1 Changing the battery pack
Inserting the battery pack [2 A]
Removing the battery pack [2 B]
The battery pack is ready to use straight out of
the box and can be charged at any time.
6.2 Changing the battery pack
Inserting the battery pack [2 A]
Removing the battery pack [2 B]
The battery pack is ready to use straight out of
the box and can be charged at any time.
Further information about the battery
pack and charger can be found in the
corresponding operating manual.
7 Settings
CAUTION
Risk of injury
Only adjust the settings when the power
tool is switched off.
7.1 Changing direction of rotation [1-3]
Switch to the left = clockwise rotation
Switch to the right = counterclockwise rota
tion
8 Tool holder, attachments
WARNING
Risk of injury, electric shock
Always disconnect the battery pack before
any type of work on the machine!
8.1 Bit holder
The bit holder enables the operator to change
drill bits quickly.
CAUTION
Risk of injury from hot and sharp tool
Do not use any blunt or faulty tools.
Wear protective gloves.
Attaching the bit holder
Move the switch [1-4] to the MAN position.
Push the bit holder [3-2] into the tool hold
er [3-4] until it clicks into place.
Place the bit [3-3] in the holder.
Then affix the depth stop to the transmis
sion housing, as described in section .
Removing the bit holder
Take out the depth stop as described in sec
tion .
Remove the bit holder from the tool holder
by pulling firmly.
8.2 Changing the bit
To change the bit [1-6], you can use the depth
stop [1-5].
English
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DWC 18-2500 - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DWC 18-2500 - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 3.22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info