778634
13
Zoom out
Zoom in
Previous page
1/88
Next page
DTSC 400 Li, RTSC 400 Li
13
GB
Original operating manual
1Symbols
2 Safety instructions
2.1 General safety instructions
WARNING! Read all safety warnings, instruc-
tions, illustrations and specifications provid-
ed with this power tool. Failure to follow all instruc-
tions listed below may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers toyour
mains-operated (corded) power tool or battery-op-
erated (cordless) power tool.
2.2 Machine-related safety instructions
Dust that is harmful to your health may be pro-
duced as you work (e.g. paint products contain-
ing lead and some types of wood).
Contact with
or inhalation of this dust may pose a risk for the
operating personnel or persons in the vicinity.
Observe the safety regulations that apply in your
country.
Wear a P2 respiratory mask to protect your
health. In enclosed spaces, ensure that
there is sufficient ventilation and connect an
extraction system.
Always wear protective goggles to protect
against sanding hazards.
Clean work equipment soaked in oils, for exam-
ple sanding pad or polishing felt, with water and
allow to dry.
Work equipment soaked in oil may
combust spontaneously.
Attention: Risk of fire! Avoid overheating the
grinding material and the sander. Always empty
the dust container before taking a break.
Swarf
in the filter bag or filter of the mobile dust ex-
tractor may self-ignite in unfavourable condi-
tions such as flying sparks when grinding metals.
Particular danger exists if the swarf is mixed with
paint, polyurethane residue or other chemical
materials and the grinding material is hot after
long periods of work.
If the power tool is dropped or falls, check for
damage to the machine and sanding pad. Re-
move the sanding pad for closer inspection.
Have the damaged parts repaired before
use.
Broken sanding pads and damaged ma-
chines can cause injuries and machine instabili-
ty.
Always use original Festool sanding pads.
While using the long-life dust bag be aware of
electric charge. Always when possible use an
antistatic suction hose with the power tool.
A
slight electric shock may cause you to panic
briefly and become distracted, which may result
in an accident.
Only use the mains adapter with this device.
Only use the mains adapter together with an
original Festool plug-it cable.
Only for AS/NZS:
The tool shall always be sup-
plied via residual current device with a rated re-
sidual current of 30 mA or less.
2.3 Battery pack and charger safety instruc-
tions
This charger can be operated by persons with re-
duced physical, sensory or mental capabilities or
a lack of practical experience and knowledge,
provided they are supervised or have been in-
structed to use the machine safely and under-
stand the dangers of machine operation.
Children
are not allowed use or play with the ma-
chine.
Symbol Significance
Warning of general danger
Risk of electric shock
Read operating instructions and safety
notices!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Switch the power supply on.
Switch the power supply off.
Do not dispose of as domestic waste.
Tip or advice
Handling instruction
Safety class II
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DTSC 400 Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DTSC 400 Li in the language / languages: All languages as an attachment in your email.

The manual is 22.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info