574957
12
Zoom out
Zoom in
Previous page
1/62
Next page
12
DR 20 E
GB
Original operating manual
1Symbols
2 Machine features
The specified illustrations appear at the beginning
of the Operating Instructions.
3 Intended use
Drill suitable
for drilling in metal, wood, plastics and similar
materials,
for screwing in and tightening screws.
The user is liable for improper or non-in-
tended use.
4Technical data
* Static torque electronically limited
5 Safety instructions
5.1 General safety instructions
WARNING! Read all safety warnings and all
instructions.
Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
5.2 Machine-related safety instructions
Hold power tool by insulated gripping surfaces,
when performing an operation where the cut-
ting accessory or fastener may contact hidden
wiring or its own cord.
Cutting accessory or fas-
teners contacting a "live" wire may make exposed
metal parts of the power tool "live" and could give
the operator an electric shock.
Use auxiliary handles supplied with the tool.
Loss of control can cause personal injury.
Avoid unintentional activation.
Carrying the
electric power tool with your fingers on the on/off
switch can lead to accidents.
Wait until the power tool stops completely until
placing it down.
The tool can become entangled
and lead to a loss of control of the power tool.
The machine must never be operated when wet
or located in a damp environment.
Connect de-
vices that you intend to use outdoors via an earth
leakage circuit breaker (FI) with a maximum re-
Warning of general danger
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear a dust mask.
Wear protective goggles.
Do not throw in the household waste.
[1-1]
Chuck
[1-2]
Release ring
[1-3]
Right/left switch
[1-4]
On/Off switch
[1-5]
Mains power cable
[1-6]
Additional handle
[1-7]
Depth stop
Drill DR 20 E
Power 1100 W
Idling speed 0 - 650 rpm
Max. torque 98 Nm *
Chuck clamping range 3 - 16 mm
Tool holder in drill spindle 1/4 ’’
Drill diameter max.
Steel 20 mm
Aluminium 28 mm
Wood 65 mm
Flange 57 mm
Weight 3,2 kg
Safety class /II
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DR 20 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DR 20 E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info