778804
13
Zoom out
Zoom in
Previous page
1/103
Next page
DF 700 EQ
13
GB
5.2 Machine-related safety instructions
Hold power tool by insulated gripping surfaces,
because the cutter may contact its own cord.
Cutting a "live" wire may make exposed metal
parts of the power tool "live" and could give the
operator an electric shock.
The tools must be rated for at least the speed
marked on the power tool.
Tools running over
rated speed can fly apart and cause injury.
Use the machine only with the guide frame
mounted.
The guide frame protects the user
against broken-off parts of the jointer bit and ac-
cidental contact with the jointer bit.
Only cutters provided by Festool for this pur-
pose may be mounted on the power tool.
The
use of other cutters is prohibited due to the in-
creased risk of injury.
Never use dull or damaged mortising bits.
Dull
or damaged mortising bits can cause the tool to
lurch sideways unexpectedly and lead to a loss of
control of the power tool.
Do not resharpen cutters more than twice.
Re-
sharpened cutters may affect the precision of the
cutting results.
Do not operate the tool if the spring-loaded
fence does not return to its forward rest posi-
tion.
The fence covers the mortising bit and pre-
vents accidental contact. If the slides of the fence
do not move freely, have the tool serviced imme-
diately.
5.3 Emission levels
Levels determined in accordance with EN 60745 are
typically:
Vibration emission value a
h
(vector sum for three
directions) and uncertainty K measured in accor-
dance with EN 60745:
The specified emissions values (vibration, noise)
are used to compare machines.
They are also used for making preliminary esti-
mates regarding vibration and noise loads during
operation.
They represent the primary applications of the
power tool.
Increase possible for other applications, with other
insertion tools or if not maintained adequately. Take
note of idling and downtimes of machine!
6Operation
Always switch the machine off before con-
necting or disconnecting the mains power
cable!
Connecting and detaching the mains power cable
[1-17]
see Fig.
[2]
.
The switch
[1-4]
is an on/off switch (I = ON, 0 =
OFF).
Peel off the protective film from the bottom of
the guide frame
[3-4]
.
Remove the transport safety device
[1-18]
.
7 Settings
7.1 Electronics
The machine features full-wave phase control elec-
tronics with the following features:
Smooth start-up
The electronically controlled smooth start-up en-
sures that the machine starts up jolt-free.
Constant speed
The motor speed remains constant through electron-
ic control to ensure a uniform cutting speed even
Sound pressure level L
PA
= 83 dB(A)
Noise level L
WA
= 94 dB(A)
Measuring uncertainty allow-
ance K = 3 dB
CAUTION
Operating noise
Damage to hearing
Use ear protection!
Handle a
h
< 2,5 m/s
2
Uncertainty K = 1,5 m/s
2
WARNING
Unauthorised voltage or frequency!
Risk of accident
The mains voltage and the frequency of the pow-
er source must correspond with the specifica-
tions on the machine's name plate.
In North America, only Festool machines with
the voltage specifications 120 V/60 Hz may be
used.
WARNING
Risk of injury, electric shock
Always pull the mains plug out of the socket be-
fore performing any type of maintenance on the
machine!
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool DF 700 EQ - Dominio XL - 2021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool DF 700 EQ - Dominio XL - 2021 in the language / languages: All languages as an attachment in your email.

The manual is 8.47 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info