Manual Festool CTM 48 E LE AC (page 16 of 100) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499165

Zoom out

Zoom in

1/100

CTM

7.9 Volumetric flow monitoring

An acoustic warning signal sounds if the air speed in the suction hose falls below 20 m/s.

8Working

8.1 Handling

Hose store:

after finishing work, you can feed the

suction hose through the recess

[8-3]

and place it

in the hose store. You can do the same with the

mains cable through the other recess

[8-2]

SysDoc Systainer attachment system:

a Systainer

can be attached to the storage area via the two

slides

[8-1]

8.2 AUTO

Clean

- Cleaning the main filter

(only versions with AutoClean)

To maintain a constant suction power when extract-

ing fine dust, you can adjust the frequency of the

automatic

[1-8]

cleaning system in infinite vari-

ables using the rotary knob. Always use the auto-

matic cleaning system in combination with a dis-

posal bag (in line with dust class 'M' requirements).

Before performing wet extraction tasks or

working with a filter bag, set the

[1-8]

rotary

knob to position 0.



Set the automatic cleaning function to the high-

est setting when

[1-8]

extracting large quanti-

ties of dust.

Manual cleaning

Turn the switch

[1-11]

to the

symbol.

We recommend cleaning the main filter complete-

ly if severely clogged:



Cover the end of the nozzle or suction hose with

your hand for 2 seconds.



Turn the switch

[1-11]

to the

symbol.



When the CT-VS closing slide is used (order no.:

497926), the filter can be cleaned fully without

removing the connected electric power tools.

In intensive applications that generate adherent

dust, it may be necessary to clean the filter element

mechanically under certain circumstances (ex-

tract). Wear a dust mask!

8.3 Special features of the CTM 36 E AC- LHS

To use the mobile dust extractor in combination

with the

PLANEX



Use kink-resistant suction hose D 36 mm x 3.5

m-AS.



Use a special suction sleeve for connecting the

PLANEX



Use closing slide CT-VS between the intake

opening

[1-2]

and suction hose.



Attach the tool holder.



Always use with a disposal bag!

8.4 Extracting dry materials

Observe the following

when extracting dust gener-

ated by operating electric power tools:

If the exhaust air is discharged back into the room,

the

air renewal rate L

within the room must be

sufficient. The volume of air discharged back into

the room must not exceed 50% of the fresh air vol-

ume flow (room volume V

x air renewal rate L

Observe all the relevant regional regulations.

Possible causes Solution

Value set on the suction power adjuster

[1-10]

too low.

Set the suction power adjuster to a higher value (see

Chapter 7.4).

Rotary knob

[1-9]

not set to the correct hose

diameter.

Set the knob to the correct hose diameter (see Chap-

ter 7.1).

Suction hose blocked or kinked. Remove blockage or kink.

Filter bag full. Insert a new filter bag (see Chapter 7.7).

Filter element clogged. Change the filter element (see Chapter 9.1).

Only AUTO

Clean

Clean filter element (see chapter

8.2).

Monitoring electronics malfunction. Send to a Festool service workshop for repair.

Wet extraction. Functional reliability not affected, no actions required.

CAUTION

Hazardous dust

Damage to the respiratory passage



Use a filter or disposal bag when extracting haz-

ardous materials!



Do not use the machine if the volumetric flow

monitoring function is inactive.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTM 48 E LE AC in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 6,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CTM 48 E LE AC Manual

Product: