Manual Festool CTM 33 E SG (page 14 of 78) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

499148

Zoom out

Zoom in

1/78

3.4 Temperature control

A temperature fuse switches the dust ex-

tractor off before this reaches a critical

temperature to protect against overheat-

ing - switch dust extractor off and leave for

around 5 minutes to cool down.

If the dust extractor still cannot be switched

back on, please consult a Festool-service

centre.

3.5 Connecting an electric tool

Observe the maximum connected

load on the appliance plug socket

(see “Technical Data“)!

Make sure that the electric tool is

switched off when plugging it in and

unplugging it.

Connect the electric tool to the appliance

plug socket (1.7).

3.6 Connecting pneumatic tools

Make sure that the pneumatic tool

is switched off when plugging it in

and unplugging it.

When the compressed-air module (1.8)

(452829; supplied ready with CTM 33 LE

SG and CTM 44 LE) is ﬁ tted, the automatic

cut-in of the appliance also operates in

conjunction with compressed-air tools. We

also recommend ﬁ tting of the VE supply

unit (452797). The supply unit ﬁ lters and

oils the compressed air and allows the air

pressure to be regulated. An IAS connecting

piece (454757) is available for connecting

Festool compressed-air tools with the IAS

system. To ensure trouble-free functioning

of the automatic cut-in, the operating pres-

sure of the tool must be 6 bar.

4 Operation

4.1 Opening/closing the vacuum

cleaner

- Open retaining clamps (2.2),

- Raise upper part (2.4) until support catch

(2.5) engages.

Follow the reverse order to close the appli-

ance. You must raise the upper part slightly

before depressing or disengaging the support.

4.2 Changing the ﬁ lter

During the following procedure, take

care not to raise dust more than is

unavoidable.

Wear a P2 breathing protection mask

with health-hazardous dusts!

a) Changing the ﬁ lter bag (3.4)

Order no.:

CTM 22 E SG 452970

CTM 33 E SG/CTM 33 LE SG 452971

CTM 44 E/CTM 44 LE 452972

CTM 55 E 452973

- Open the vacuum cleaner,

- Remove the used ﬁ lter bag (see printed

text on ﬁ lter bag),

- Dispose of the used ﬁ lter bag in accord-

ance with statutory requirements,

- Thoroughly clean the dirt container (2.10)

and the space (3.1) for suction turbine

(wipe down with a damp cloth),

- Insert new ﬁ lter bag (see printed text on

ﬁ lter bag). Important: Press the ﬁ lter

bag sleeve (3.3) ﬁ rmly onto the dust ex-

traction ﬁ tting (3.2)!

- Close the vacuum cleaner.

b) Changing the filter element

(2.3)

Order no.: 452923

Do not operate machine without a

ﬁ lter element. This may damage the

motor.

- Open the vacuum cleaner,

- Remove the used ﬁ lter element (see print-

ed text on the ﬁ lter element packaging),

- Dispose of the used ﬁ lter element in a

sealed, dust-tight bag in accordance with

statutory requirements,

- Thoroughly clean dirt container (2.10) and

space (3.1) for the suction turbine (wipe

down with a damp cloth),

- Fit a new ﬁ lter element (see printed text

on the ﬁ lter element packaging),

- Close vacuum cleaner.

4.3 Cleaning the ﬁ lter element

To clean, move the handle (2.1) to and fro

about 10 times. N.B.: You need to clean the

ﬁ lter element only if you use the vacuum

cleaner without a ﬁ lter bag.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTM 33 E SG in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,66 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CTM 33 E SG Manual

Product: