499144

Festool CTL Mini Manual

12
Zoom out
Zoom in
Previous page
1/54
Next page
12
Limit values: exhaust air max. 50% of the clear
air volume
Formula: room volume V
R
x air renewal rate L
W
4.2 Extracting wet materials/liquids
Remove the fi lter bag!
Recommendation: use special wet fi lter.
The dust extractor stops automatically when
the maximum level is reached.
After wet extraction, allow the main fi lter to dry!
CAUTION
Escaping foam and fl uids
f Switch off and empty the machine immedi-
ately.
4.3 After fi nishing work
f Switch off the mobile dust extractor and pull
out the mains plug.
f Empty dirt tank.
f Insert the suction hose [5-1] and connecting
pipe [5-2] in the top section. The mains cable
then has to be inserted through the opening
[5-3].
f Clean the vacuum cleaner inside and outside
by suction and wiping.
f Deposit the appliance in a dry room, safe from
unauthorised use.
5 Maintenance and care
WARNING
Risk of injury, electric shock
f Always disconnect the mains plug from the
socket before performing maintenance work
on the machine!
f All maintenance and repair work which re-
quires the motor housing to be opened must
only be carried out by an authorised service
workshop.
Customer service and repair only
through manufacturer or service work-
shops: Please fi nd the nearest address
at: www.festool.com/Service
EKAT
1
2
3
5
4
Use only original Festool spare parts!
Order No. at:
www.festool.com/Service
f Clean the level sensors [3-1] and empty the dirt
trap [2-2] regularly.
Observe the following instructions:
– The manufacturer or an instructed person must
perform a dust test at least once a year to deter-
mine whether the fi lter is damaged, the machine
is sealed properly and the monitoring features
are functioning correctly
– Anything that cannot be cleaned must be dis-
carded in impermeable bags. Observe applicable
disposal regulations!
5.1 Changing the fi lter
a) Changing the fi lter bag
Order No.: CTL MINI 498410, CTL MIDI 498411
f Open locking clips [1-4], remove top section
[1-5],
f Change fi lter bag [2-1]–see print on fi lter bag,
f Replace top section, close locking clips.
Note: A replacement fi lter bag can be stored in
the storage compartment [5-4].
b) Changing the fi lter element
Order No.: 456790
Do not operate machine without a fi lter
element. This may damage the motor.
f Open locking clips [1-4], remove top section
[1-5],
f Fold over handle [3-2] and remove holder [3-3],
f Remove used fi lter element (3.4) and replace
with a new one,
f Replace holder and fold over handle until it
latches into place,
f Replace top section, close locking clips.
The order numbers for accessories, fi lters and
consumables can be found in the Festool cata-
logue or on the internet at “www.festool.com”.
6 Environment
Do not dispose of the device in household waste!
Recycle devices, accessories and packaging.
Observe applicable country-specifi c regulations.
EU only: European Directive 2002/96/EC stipulates
that used electric power tools must be collected
separately and disposed of at an environmentally
responsible recycling centre.
Information on REACh: www.festool.com/ reach
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL Mini in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 4,04 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info