778794
22
Zoom out
Zoom in
Previous page
1/113
Next page
9.1 Changing the filter element
NOTICE
Motor damage
Never operate the extractor without a filter
element fitted as the motor may become
damaged.
Open the locking clips [2-2] and remove the
top section of the machine [2-1].
Turn the top section of the machine so that
the main filter is facing upwards (Fig.[7]).
Fold over the lever [7-3] and remove the re
tainer. [7-2]
Remove the used main filter and re
place [7-1] with a new one.
Dispose of the used filter in accordance
with statutory regulations.
Insert the retainer [7-2] and fold over the
lever [7-3] until it engages.
Replace the top section [2-1] and close the
locking clips [2-2].
9.2 Changing the cooling air filter [8]
Replace the cooling air filter if the mobile dust
extractor switches off due to excess tempera
ture and replace at least once a year.
We recommend that you always replace
the cooling air filter together with the main
filter.
Unscrew the cooling air cover [8-1].
Remove the cooling air filter and replace
with a new one!
Close the cooling air cover.
9.3 Emptying the dust container
The dust container [2-3] can be emptied once
the top section has been removed.
After extracting fluids, clean the fill level
sensors [9-1] regularly with a soft cloth and
inspect for damage.
10 Accessories
WARNING
Risk of explosion resulting from the use of
unapproved accessories and spare parts
For mobile dust extractors of design type
22 only accessories and spare parts ap
proved by Festool especially for this pur
pose can be used - see listed consumables,
accessories list and spare parts catalogue.
Use only original Festool accessories and
Festool consumable material intended for this
machine. These components are designed spe
cifically for this machine. Using accessories
and consumable material from other suppliers
will most likely affect the quality of your results
and limit warranty claims. Machine wear or
your own personal workload may increase de
pending on the application. Protect yourself and
your machine, and preserve your warranty
claims by always using original Festool acces
sories and Festool consumable material!
The order numbers for the accessories and fil
ters can be found in the Festool catalogue or on
the Internet at "www.festool.com".
11 Environment
Do not dispose of the device in
household waste! Recycle devices,
accessories and packaging. Observe
applicable national regulations.
EU only: In accordance with European Directive
on waste electrical and electronic equipment
and implementation in national law, used elec
tric power tools must be collected separately
and handed in for environmentally friendly re
cycling.
Return used or faulty battery packs to your lo
cal specialist retailer, Festool after-sales serv
ice or nearest public waste management facility
(observe applicable regulations). Batteries
must be discharged on return. Battery packs
will then be recycled.
EU only: In accordance with the European Di
rective on batteries and implementation in na
tional law, defective or used battery packs/
batteries must be collected separately and
handed in for environmentally friendly recy
cling.
Information on REACh: www.festool.com/reach
12 General information
Imported into the UK by
Festool UK Ltd
1 Anglo Saxon Way
Bury St Edmunds
IP30 9XH
Great Britain
English
22
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL 48 E LE EC-B22 R1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E LE EC-B22 R1 in the language / languages: All languages as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info