778794

Festool CTL 48 E LE EC-B22 R1 Manual

21
Zoom out
Zoom in
Previous page
1/113
Next page
8.3 Extracting fluids
Remove the filter bag before absorbing fluids
(see section 7.8). The use of a special wet filter
is recommended.
The dust extraction stops automatically when
the maximum fill level is reached.
Dry main filter and container after wet suction
ing.
CAUTION
Escaping foam and fluids
► Switch off the machine immediately and
empty the dirt trap.
8.4 After finishing work
Empty the mobile dust extractor after ev
ery use and clean if necessary.
► Switch off the mobile dust extractor and
pull out the mains plug.
► Wind up the mains power cable.
► Empty the dirt trap.
► Close off the extractor opening [1-2] using
the sealing plug [1-1].
WARNING
Hazardous dust
Damage to the respiratory passage
► Wipe down the mobile dust extractor and
clean all accessories thoroughly using the
extractor (inside and out) before removing
from the working area.
► Parts that you were not able to clean thor
oughly must be sealed in an airtight plastic
bag prior to transportation.
► Wear a dust mask!
The machine shall be stored indoors on
ly.
► Place the mobile dust extractor in a dry
room inaccessible to unauthorised users.
9 Maintenance and care
WARNING
Risk of injury, electric shock
► Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
► All maintenance and repair work which re
quires the motor housing to be opened
must always be carried out by an author
ised service workshop.
WARNING
Electrostatic charges
Risk of explosion
► Cleaning, maintenance and servicing work
may only be realised outside Zone 22.
Damaged safety devices and components must
be properly repaired or replaced in a recog
nised specialist workshop, unless otherwise in
dicated in the operating manual.
Customer service and repairs must only be
carried out by the manufacturer or service
workshops: Find the nearest address at:
www.festool.com/service
EKAT
1
235
4
Always use original Festool spare parts. Order
no. at: www.festool.com/service
Observe the following information:
– Dust-related inspection (e.g. for filter dam
age, tightness of the machine and function
of the control devices) by the manufacturer
or an instructed person at least once a
year.
– During maintenance and repair work, all
components that cannot be cleaned satis
factorily must be replaced. The old compo
nents must be sealed in impermeable plas
tic bags prior to disposal in compliance
with applicable regulations for this type of
waste.
– Provided maintenance personnel or other
persons in the vicinity are not endangered,
the user must dismantle and clean the ma
chine prior to performing maintenance
work. Appropriate precautionary measures
include decontaminating the machine prior
to disassembly, making provisions for lo
cally filtered forced ventilation at the loca
tion of machine disassembly, cleaning the
maintenance area and appropriate person
al protective equipment.
English
21
… 21 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL 48 E LE EC-B22 R1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E LE EC-B22 R1 in the language / languages: All languages as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info