778794

Festool CTL 48 E LE EC-B22 R1 Manual

17
Zoom out
Zoom in
Previous page
1/113
Next page
When extracting large quantities of oak
or beech wood dust or dust that exceeds
the permitted limit values, only extract from a
single machine (electric or air tool).
–Risk of explosion and fire hazard: Also ob
serve any other restrictions relating to dust
with an ignition energy of less than 1 mJ
specified by the labour authorities. Do not
extract sparks or hot dust, flammable or
explosive fluids (e.g. petrol, thinner), ag
gressive fluids/solids (e.g. acid, leach, sol
vent). This mobile dust extractor is suitable
for extracting paint dust.
– Do not damage the mains power cable (e.g.
by driving over, dragging, etc.). Protect
from heat, oil and sharp edges. Do not pull
the plug from the socket by the cable.
– Check the plug and the cable regularly and
have them replaced by an authorised serv
ice workshop should either become dam
aged. Always replace the mains power ca
ble with the type specified in the spare
parts list.
– Do not expose the machine to rain.
– For reasons of safety, never operate the
machine from an unearthed socket.
– Always use the machine socket for the pur
pose specified in the manual.
– Always use original Festool accessories.
– Pull the plug from the socket when the ma
chine is not in use and prior to mainte
nance and cleaning work.
–Attention! To avoid electrostatic charging
do not clean the device with a dry cloth.
Use an antistatic cloth or damp cloth.
– Design 22 dust extractors are suitable for
connecting to machines in Zone 22. Care
must be taken to ensure that no sources of
ignition are extracted. Conductive machine
components, including extractor hoods,
and conductive parts on machines from
protection class II must be electrostatically
earthed. The electrostatic earthing can be
routed through the dust extractor or estab
lished using separate electrostatic earthing
equipment.
– Risk of explosion: Keep the
socket on the appliance closed in zone 22
at all times and do not use it there.
– Incorporate the device in your explosion
prevention or fire prevention documenta
tion.
– In the event of a fire immediately discon
nect the machine from the power supply
and introduce measures according to fire
regulations.
– Do not lift or transport using a crane hook
or lifting gear!
– The device may only be operated if all fil
ters are present and undamaged, including
the filter for the motor cooling air.
– Do not insert and remove the plug under
load.
– In an emergency (e.g. short circuit or other
electrical faults occur), switch off the ma
chine and pull out the mains plug.
– This machine must not be used by people
who might have a particularly adverse re
action to an electric shock (e.g. people with
cardiac pacemakers), because the possi
bility of the machine building up a static
charge cannot be excluded.
–Pay attention to the work environment and
watch out for your own safety and the
safety of others when transporting or
working with the machine.
In this way, you can for example prevent
tripping hazards caused by the suction
hose or mains cable.
– Use only the original Festool suction hose.
–Keep packaging film away from children.
There is a risk of suffocation.
3 Technical data
Mobile dust extractors
Power consumption 150 ‑ 1100 W
Maximum appliance socket* connected load. EU (220‑240V)
ROK
2500 W
2200 W
Max. suction capacity (air), turbine 204 m³/h (3400 l/min)
Max. vacuum, turbine 23000 Pa
English
17
… 17 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL 48 E LE EC-B22 R1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E LE EC-B22 R1 in the language / languages: All languages as an attachment in your email.

The manual is 3.21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info