778793
15
Zoom out
Zoom in
Previous page
1/78
Next page
Mobile dust extractors
CTL 48 E, CTL 48 E LE 18.8 kg
CTL 26 E AC 14.7 kg
CTL 36 E AC, CTL 36 E LE AC, CTL 36 E
AC‑LHS
15.2 kg
CTL 48 E AC, CTL 48 E LE AC 19.6 kg
5 Intended use
Mobile dust extractor suitable for
extracting dust up to 1 mg/m³ according to
dust class L,
extracting water,
for increased loads during commercial use,
according to IEC/EN 60335-2-69.
The user is liable for improper or non-in
tended use.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the ma
chine's name plate.
Observe country-specific regulations.
6.1 Initial commissioning
Insert the filter/disposal bag [2].
Fit the cord holder [3].
Connect the suction hose [4].
6.2 Connecting the mobile dust extractor
WARNING
Risk of injury from tools starting up unex
pectedly
Before setting the switch to the "AUTO" or
"MAN" position, make sure that the con
nected tool is switched off.
The switch [1-8] serves as an on/off switch.
Switch position "0"
Appliance socket [1-3] is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket [1-3] is connected to the pow
er, the mobile dust extractor starts.
"Auto" switch position
Appliance socket [1-3] is connected to the pow
er, the mobile dust extractor starts when the
connected tool is switched on.
Insert the plug into an earthed socket.
Pull the plug from the socket when the
machine is not in use and prior to main
tenance and cleaning work.
6.3 Connecting electric power tools
WARNING
Risk of injury
Observe the maximum appliance socket
connected load (see chapter "Technical da
ta")
Switch off the electric power tool.
Connect the electric power tool to the appli
ance socket [1-3].
Special features of CTL26 E SD
CTL 26 E SD E/A: socket module with auto
matic switch-on function for the use of two
electric power tools: e.g. 2 sanders, 1 jig
saw + 1 sander
CTL 26 E SD: Socket module with perma
nent power supply for use as extension ca
ble: e.g. charger, lamp, etc.
6.4 Connecting pneumatic tools
WARNING
Risk of injury
Switch off the air tool.
Automatic on/off switch for air tools (CTL
36/48 E LE, CTL 36/48 E LE AC or accessories)
with compressed air module in module
slot [1-2]
Recommendation:
Attachment of service unit VE (495886):
compressed air filtered and lubricated
Use of IAS system with IAS connector
(454757) for Festool air tools
English
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CTL 48 E AC at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CTL 48 E AC in the language / languages: All languages as an attachment in your email.

The manual is 4.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info