Manual Festool CT22E (page 14 of 70) (English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish)

574993

Zoom out

Zoom in

1/70

cut-in of the appliance also operates in

conjunction with compressed-air tools. We

also recommend ﬁ tting of the VE supply

unit (452797). The supply unit ﬁ lters and

oils the compressed air and allows the air

pressure to be regulated. An IAS connecting

piece (454757) is available for connecting

Festool compressed-air tools with the IAS

system. To ensure trouble-free functioning

of the automatic cut-in, the operating pres-

sure of the tool must be 6 bar.

4 Operation

4.1 Opening/closing the vacuum

cleaner

- Open retaining clamps (2.2),

- Raise upper part (2.4) until support catch

(2.5) engages.

Follow the reverse order to close the ap-

pliance. You must raise the upper part

slightly before depressing or disengaging

the support.

4.2 Changing the ﬁ lter

During the following procedure, take

care not to raise dust more than is

unavoidable.

Wear a P2 breathing protection mask

with health-hazardous dusts!

a) Changin the ﬁ lter bag (3.4)

Order no.:

CTL 22 E SG 452970

CTL 33 E SG/CTL 33 LE SG 452971

CTL 44 E/CTL 44 LE 452972

CTL 55 E 452973

- Open the vacuum cleaner,

- Remove the used ﬁ lter bag (see printed

text on ﬁ lter bag),

- Dispose of the used ﬁ lter bag in accord-

ance with statutory requirements,

- Thoroughly clean the dirt container (2.10)

and the space (3.1) for suction turbine

(wipe down with a damp cloth),

- Insert new ﬁ lter bag (see printed text on

ﬁ lter bag). Important: Press the ﬁ lter

bag sleeve (3.3) ﬁ rmly onto the dust ex-

traction ﬁ tting (3.2)!

- Close the vacuum cleaner.

b) Changing the filter element

(2.3)

Order no.: 452923

Do not operate machine without a

ﬁ lter element. This may damage the

motor.

- Open the vacuum cleaner,

- Remove the used ﬁ lter element (see print-

ed text on the ﬁ lter element packaging),

- Dispose of the used ﬁ lter element in a

sealed, dust-tight bag in accordance with

statutory requirements,

- Thoroughly clean dirt container (2.10) and

space (3.1) for the suction turbine (wipe

down with a damp cloth),

- Fit a new ﬁ lter element (see printed text

on the ﬁ lter element packaging),

- Close vacuum cleaner.

4.3 Cleaning the ﬁ lter element

To clean, move the handle (2.1) to and fro

about 10 times. N.B.: You need to clean the

ﬁ lter element only if you use the vacuum

cleaner without a ﬁ lter bag.

4.4 Emptying the dirt trap (2.10)

Always remove the upper part of the

vacuum cleaner before emptying the dirt

container!

- Open the vacuum cleaner,

- Raise the upper part slightly, depress the

support (2.5),

- Raise the upper part to the stop (vertical

position),

- Remove the upper part by moving it for-

wards horizontally,

- Empty the dirt container,

- Replace the upper part. Warning: Make

sure that both upper-part pins are fully

inserted in the recesses (1.5)!

- Close the vacuum cleaner.

4.5 Stand/Brake

The wheels can be blocked by the brakes

(2.8), thus preventing the vacuum cleaner

from rolling away unexpectedly.

4.6 Hose depot (partly in scope of

delivery)

Securing the hose depot on the dust extrac-

tor: see Fig. 4. When work is complete, you

can guide the extractor hose through the

opening (4.1) and deposit the hose in the

depot. Similarly, the mains cable can also

be guided through the opening (4.2) and

deposited in the hose depot.

5 Application

- A systainer can be ﬁ xed to the storage

area (1.9) with the two clamps (1.11).

Tools or accessories can also be stowed

on the storage area and in the storage

compartments (1.6, not with CTL 22).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Festool CT22E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 0,6 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Festool CT22E Manual

Product: