574991
7
Zoom out
Zoom in
Previous page
1/54
Next page
7
Please read the operating instructions and observe the safety precautions!
The specified illustrations can be found at the beginning of the operating instructions.
1 Technical data CT 11 E
Power consumption 350 - 1,200 W
Connected load to appliance plug socket max.:
EC 2,400 W
CH 1,100 W
GB 1,800 W
AUS 1,200 W
Volume flow (air) max., turbine 228 m
3
/h
Vacuum max., turbine 23,000 Pa
Volume flow (air), typical value in operation 160 m
3
/h
Vacuum, typical value in operation 18,000 Pa
Filter surface 14,000 cm²
Suction hose ø 27mm x 35 m
Sound pressure level in compliance with DIN 45 635 72 dB(A)
Container capacity 15 l
Dimensions L x W x H 671 x 390 x 350 mm
Weight 11.5 kg
Power cable length 7.5 m
Protection type IP X4
GB
2 Specified use
The vacuum cleaners are designed for use as
specified for the aspiration and evacuation of non-
noxious dusts, dirt, sand, shavings etc..
The vacuum cleaners are designed as specified
for vacuuming water.
The vacuum cleaners are designed in accordance
with EN 60335-1 and EN 60335-2-69 for a higher
loading in industrial use.
2.1 Safety instructions
- Use only accessories approved by Festool (see
the Festool Catalogue).
- Do not suck in any sparks or hot chippings.
- With the exception of wood dust, do not suck in
any flammable or explosive dusts such as
magnesium, aluminium etc. Risk of explosion!
- Do not use to extract flammable or explosive
liquids (e.g. petrol, thinners). Risk of explosion!
- Do not use to extract aggressive liquids (e.g.
acids, alkalis, solvents)
- Remove plug from mains socket when not in use
and before maintenance work.
- Do not pull plug out of mains socket by its cable.
- Protect the cable against heat, oil and sharp
edges.
- Do not leave devices out in the rain.
- Check the plugs and cables regularly and have
them replaced by an expert if damaged.
- Do not lift or carry the devices by their handles
using a crane hook or lifting gear.
- For safety reasons, only operate the machine
using a totally earthed socket.
3 Appliance preparation and initial
operation
3.1 Electrical connection
Caution! The operating voltage shown on the rating
plate must correspond to the voltage of the mains
power supply. Make sure that the vacuum cleaner
is switched off when you plug the power cable in.
3.2 On/off switch (1.3)
In position 0 the vacuum cleaner is switched off and
the appliance plug socket (1.9) is dead.
Two modes of operation are possible:
a) Switch position MAN:
The cleaner motor starts immediately.
The appliance plug socket is dead.
Switch position and suction hose diameter must
match.
b) Switch position Auto:
The appliance plug socket is live. The cleaner motor
starts only when the tool connected to the appliance
plug socket is switched on.
Caution! Before turning the switch to the Auto
position, ensure that the tool connected to the
appliance plug socket is switched off.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CT11E - 1200W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CT11E - 1200W in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 5,55 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info