778780
16
Zoom out
Zoom in
Previous page
1/77
Next page
7.2 Temperature cut-out
A temperature cut-out switches the mobile dust
extractor off when it reaches a critical tempera
ture to prevent overheating. The bottom
LED [1-12] indicates a fault.
LED lights up red Excessive temperature
Switch off the mobile dust extractor, let it
cool down.
Switch on the mobile dust extractor again
after approx. five minutes.
8 Working
8.1 Dust extraction
Extracting dry materials
Always use a filter bag.
8.2 Extracting wet materials/liquids
Remove the filter bag!
Use a special wet filter.
The dust extractor stops automatically when
the maximum fill level is reached.
The bottom LED [1-12] lights up red.
Switch off the mobile dust extractor [1-10].
Open the locking clips [1-7] and remove the
top section of the machine.
Empty the dirt trap [1-9].
After wet extraction, allow the main filter to dry!
Dry the mobile dust extractor before extracting
dry dust.
CAUTION
Hazardous dust
Damage to the respiratory passage
After extracting wet materials, remove the
wet filter and replace it with the main filter
for dry materials.
CAUTION
Escaping foam and fluids
Switch off and empty the machine immedi
ately.
8.3 Exhaust-air outlet
CAUTION
Hazardous dust
Damage to the respiratory passage
Do not blow off any dust!
The exhaust-air outlet offers the option of di
verting the exhaust air outside a building using
the suction hose.
Open the grille in front of the exhaust open
ing [1-8].
Insert the suction hose in the exhaust open
ing [1-8].
8.4 Changing the filter bag with minimal
dust
Open the locking clips and remove the top
section of the machine [2].
Pull the tab on the filter bag until the filter
bag opening is fully closed.
The filter bag is now securely closed and can be
removed.
Fit the top section of the machine and close
the locking clips.
8.5 Changing the filter element [6]
Pull out the used filter drawer [1-6].
Dispose of the used filter drawer in accord
ance with statutory regulations.
Insert the new filter drawer [1-6].
Order numbers for accessories, filters and
consumables in the Festool catalogue or
online at "www.festool.com".
Only use original Festool accessories and
consumables. Only accessories tested and
approved by Festool are safe and perfectly
adapted to the machine and application.
NOTICE
Damage to the motor
Never extract material without a main filter
or with a damaged main filter, as this can
damage the motor.
8.6 After finishing work
Switch off the mobile dust extractor and
pull out the mains plug.
Vacuum and wipe the inside and outside of
the mobile dust extractor to clean it.
Empty the dirt trap.
Wind up the mains power cable.
Place the mains power cable [4-1] in the
sealable depot. To do so, lay the power ca
ble through the recess [4-2].
Disconnect the suction hose [5-1] and fix it
to the mobile dust extractor using the suc
tion hose attachment [1-3].
Regularly clean the fill level sensors [7-1]
and check for damage.
English
16
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CT 15 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CT 15 E in the language / languages: All languages as an attachment in your email.

The manual is 8.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info