778780
15
Zoom out
Zoom in
Previous page
1/77
Next page
Mobile dust extractors
Container capacity 15 l
Dimensions L x W x H 470 x 320 x 430 mm
Weight 11.2 kg
5 Intended use
Mobile dust extractor suitable for
Extracting non-hazardous dust, dirt, sand
and chips,
Extracting water,
Increased loads during commercial use,
according to IEC/EN 60335-2-69.
The mobile dust extractor is only suitable for
indoor use.
The user is liable for improper or non-in
tended use.
6 Commissioning
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the ma
chine's name plate.
Observe country-specific regulations.
6.1 Initial commissioning
Insert the filter bag [2].
Connect the suction hose[3].
6.2 Connecting the mobile dust extractor
WARNING
Risk of injury from uncontrolled tool start-
up
Before switching on ensure that the con
nected tool is switched off.
WARNING
Risk of injury from electric current
Insert the mains plug into an earthed sock
et.
Do not reach into the electrical outlet mod
ule on the mobile dust extractor.
While the mobile dust extractor is connec
ted to the mains socket, an electric cur
rent is running through electrical outlet
module on the mobile dust extractor at all
times.
Connecting the mobile dust extractor to a
mains socket
The mobile dust extractor is switched off.
Connect the power cable to a mains socket.
The electrical outlet module [1-1] is live.
Switching the mobile dust extractor to standby
mode
Press the on/off switch[1-10].
The electrical outlet module [1-1] is live.
The green LED [1-12] indicates standby
mode.
Starting the mobile dust extractor automati
cally
The mobile dust extractor is in standby mode.
To start the mobile dust extractor automati
cally: Switch on the connected tool.
Starting the mobile dust extractor manually
The mobile dust extractor is in standby mode.
Press the MAN button [1-11].
Pull the mains plug from the socket when
you are not using the mobile dust extrac
tor and before performing any cleaning and
maintenance work.
6.3 Connecting power tools
WARNING
Risk of injury
Observe the maximum electrical outlet
module connected load (see section "Tech
nical data").
Switch off the power tool.
Connecting a mains-powered power tool to the
mobile dust extractor
Connect the power tool to the electrical out
let module [1-1].
The power tool is connected to the mobile dust
extractor via the power cable.
7 Settings
7.1 Adjusting the suction power
Press the plus or minus button [1-12] while
extracting.
English
15
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CT 15 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CT 15 E in the language / languages: All languages as an attachment in your email.

The manual is 8.29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info