574992
12
Zoom out
Zoom in
Previous page
1/61
Next page
12
CT 17 E
GB
6Operation
6.1 Initial operation
Open the locking clips and remove the top sec-
tion of the machine
[2]
.
Remove accessory parts and accompanying
documents
[3]
.
Insert a filter bag
[4]
.
6.2 Connecting the suction hose
For extracting material at the intake opening
[1-1]
For blowing out material from the exhaust opening
[1-9]
6.3 Connecting the mobile dust extractor
The switch
[1-2]
serves as an on/off switch.
Switch position "0"
Appliance socket
[1-4]
is disconnected from the
power, mobile dust extractor is switched off.
"MAN" switch position
Appliance socket
[1-4]
is connected to the power,
the mobile dust extractor starts.
"Auto" switch position
Appliance socket
[1-4]
is connected to the power,
the mobile dust extractor starts when the connect-
ed tool is switched on.
Insert the plug into an earthed socket.
Pull the plug from the socket when the ma-
chine is not in use and prior to maintenance
and cleaning work.
6.4 Connecting electric power tools
Connect the electric power tool to the appliance
socket
[1-4]
.
6.5 Adjusting the suction power
Use the rotary knob
[1-3]
.
7Working
7.1 Dust extraction
Extracting dry materials
Always use a filter bag.
Extracting wet materials/liquids
Remove the filter bag!
Insert a special wet filter.
The dust extractor stops automatically when the
maximum level is reached.
After wet extraction, allow the main filter to dry!
7.2 After finishing work
Switch off the mobile dust extractor and pull out
the mains plug.
Wind up the mains power cable.
Empty the dirt trap.
Place the mobile dust extractor in a dry room in-
accessible to unauthorised users.
8 Service and maintenance
WARNING
Unauthorised voltage or frequency!
Risk of accidents
Observe the specifications on the machine’s
name plate.
Observe country-specific regulations.
WARNING
Risk of injury from tools starting up unexpectedly
Before setting the switch to the "AUTO" or
"MAN" position, make sure that the connected
tool is switched off.
WARNING
Risk of injury
Observe the maximum appliance socket con-
nected load (see chapter "Technical data")
Switch off the electric power tool.
CAUTION
Escaping foam and fluids
Switch off and empty the machine immediately.
WARNING
Risk of injury, electric shock
Always disconnect the mains plug from the
socket before performing maintenance work on
the machine!
All maintenance and repair work which requires
the motor housing to be opened must only be
carried out by an authorised service workshop.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CLEANTEX CT17E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CLEANTEX CT17E in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 7,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info