778601
21
Zoom out
Zoom in
Previous page
1/114
Next page
When working, hold the electric power tool by
the handle and guide it along the desired cut
ting line. For precise cuts and smooth running,
use two hands to guide the electric power tool.
8.1 Free saw guidance along a scribe mark
The triangular pointer on the splinterguard
[4-1] indicates the cutting line of the saw blade.
This facilitates sawing along a scribe mark.
8.2 Lighting
WARNING
Stroboscopic light could lead to misjudge
ment of the saw blade position
Risk of injury
Ensure the work area is well illuminated.
A steady light or stroboscopic light is installed
to illuminate the cutting line:
Up to approx. 2100 rpm: Steady light
From approx. 2100 rpm upwards: Stroboscopic
light
In the overhead position (+/- 45°), the
lighting is switched off completely.
If required, you can adjust the lighting:
Plug in the electric power tool.
Press both buttons [1-2] simultaneously
and hold for approx. 10 s until a beep
sounds.
Release both buttons [1-2].
Press the left button (on the pendulum
stroke side) the specified number of times
to set the desired mode:
Mode Indication dur
ing configura
tion
Behaviour during op
eration
1 Light flashes With stroboscope
(standard)
2 Light on Steady light without
stroboscope
3 Light off Light switched off
Press the right button to save the setting.
9 Service and maintenance
WARNING
Risk of injury, electric shock
Always pull the mains plug from the socket
before performing any servicing and main
tenance work.
All maintenance and repair work which re
quires the motor housing to be opened
should always be carried out by an author
ised service workshop.
Customer service and repairs must
only be carried out by the manufac
turer or service workshops. Find the
nearest address at:
www.festool.co.uk/service
Always use original Festool spare
parts. Order no. at:
www.festool.co.uk/service
EKAT
1
235
4
9.1 Observe the following information
Check the guidance roller regularly for
wear.
Regularly remove dust deposits from the
chip guard.
Regularly clean the base runner to prevent
scratches and cores on the surface.
Damaged safety devices and components
must be repaired or replaced in a recog
nised specialist workshop, unless otherwise
indicated in the operating instructions.
To ensure constant air circulation, always
keep the cooling air openings in the motor
housing clean and free of blockages.
Keep the contacts on the power tool, charg
er and battery pack clean.
9.2 Cleaning the chip ejection opening
Clean the chip ejection opening [1-15] regularly
to prevent blockages:
Remove the chip guard.
Use a brush or vacuum cleaner to clean the
chip ejection opening.
Reinsert the chip guard.
10 Accessories
The order numbers of the accessories and tools
can be found in the Festool catalogue or on the
Internet at "www.festool.com".
10.1 Saw blades, other accessories
In order to saw different materials quickly and
cleanly, Festool offers saw blades for all appli
English
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool CARVEX PSB 420 EBQ at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool CARVEX PSB 420 EBQ in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 2.71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info