458693
10
Zoom out
Zoom in
Previous page
1/24
Next page
10
Speed regulation:
The speed controller (1.9/2.3) provides infinitely variable
setting between 1800 and 3800 rpm of the speed of the saw
blade. This enables you to optimise the cutting speed to suit
the material.
Constant speed:
The pre-selected speed remains constant whether the machine
is in operation or in neutral position.
Diode display:
- The green diode (2.2) shows the operator that the machine
is in operation.
- The red diode (2.1) shows that the motor is overloaded by
about 70 %. If the motor is thus overloaded for a lengthy
period, it is switched off by the safety electronics.
Our recommendation: If the red diode lights up, lower the
feed power until the red diode goes off again. You are then
working within the allowed load.
Overload protection:
Current limiting prevents permissibly high current con-
sumption under extreme overload. This can lead to a decrease
in the motor speed. The motor immediately restarts after the
load is removed.
Temperature protection:
To prevent overheating, the safety electronics switches the
machine off when it reaches a critical motor temperature.
Let the machine cool down for approx. 3-5 minutes before
using it again. The machine requires less time to cool down if
it is running, i.e. in neutral position.
Note: The lower the AWG number, the stronger the cable.
3 Machine construction
Always disconnect the plug from the power
supply before making any adjustments to the circular saw or
installing or removing any accessory!
3.1 Electronics
The AT 65 E hand-operated circular saw has solid shaft
electronics with the following functions:
Smooth start-up:
The electronically controlled smooth start-up facility enables
start-up of the machine without jerks and requires a lower
start-up current.
No-load speed limitation:
The electronics limit the idling speed in relation to the operating
speed to max. 3800 /min. By this means the saw is rendered
very quiet during idling, ensuring that the gears and the motor
are treated with care.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool ATF 65 E at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool ATF 65 E in the language / languages: English as an attachment in your email.

The manual is 3,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info