778628
21
Zoom out
Zoom in
Previous page
1/146
Next page
2.3 Further safety warnings
Do not use the power tool in the rain or in
damp surroundings. Moisture in the power
tool may cause a short circuit and burning.
Only guide the power tool into the material
when it is switched on (running).
For safety reasons, the workpiece must be
clamped in a vice or another type of clamp
ing device. Clamping a workpiece frees up
both your hands for operating the power
tool.
Never perform work while standing on lad
ders.
Do not carry out cutting work above metal
lic objects, nails, screws or bolts.
Use appropriate detection devices to look
for any hidden supply lines or consult your
local utility company. If the insertion tool
makes contact with live cables, it can result
in fire and electric shock. Damage to a gas
pipe can lead to an explosion. Penetration
of a water pipe can result in damage to
property.
Harmful/toxic dust may be produced dur
ing your work (e.g. paint containing lead,
certain types of wood and metal). Only
qualified persons are permitted to handle
materials containing asbestos. Aontact
with or inhalation of this dust may pose a
risk for the operating personnel or persons
in the vicinity. Comply with the safety regu
lations that apply in your country.
Wear a P2 respiratory mask to protect
your health.
After machining mineral materials (e.g.
gypsum): Blow out the inside of the power
tool through the vents and the control ele
ment using dry, oil-free compressed air.
Otherwise, dust deposits may build up in
side the power tool's housing and on the
on/off switch and harden when exposed to
humidity. This may impair the switching
mechanism and cause the power tool to
overheat.
After machining metal: Blow out the inside
of the power tool through the vents using
dry, oil-free compressed air. Otherwise,
conductive dust deposits may build up in
side the power tool. This can cause a short-
circuit.
Do not use power supply units or third-
party battery packs to operate cordless
power tools. Do not use third-party charg
ers to charge the battery packs. The use of
accessories not expressly authorised by the
manufacturer can result in electric shocks
and/or serious accidents.
2.4 Safety warnings for sanding tools
Sanding tools are fragile, which is why you
must be extremely careful when handling
them. The use of damaged, incorrectly
clamped or inserted sanding tools is dan
gerous and can cause serious injuries.
Ensure that the sanding tools are not ex
posed to any mechanical damage or harm
ful environmental conditions during stor
age.
Handle and transport sanding tools with
care.
Pay attention to the information on the la
bel or the sanding tool itself, as well as us
age restrictions, safety warnings or other
instructions. If any points are unclear when
choosing sanding tools, the user must con
tact the manufacturer for information be
fore using the tool.
Sanding tools must be fitted in accordance
with Section 8.2.
Only experienced staff are permitted to fit
sanding tools.
2.5 Emission levels
The levels determined in accordance with EN
60745 are typically:
Sound pressure level LPA = 86 dB(A)
Sound power level LWA = 97 dB(A)
Uncertainty K = 3 dB
CAUTION
Noise generated when working
Risk of damage to hearing
Use ear protection.
Vibration emission level ah (vector sum for
three directions) and uncertainty K measured in
accordance with EN 60745:
Sanding
ah = 5 m/s2
K = 2 m/s2
English
21
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Festool AGC 18 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Festool AGC 18 in the language / languages: All languages as an attachment in your email.

The manual is 3.53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info