724578
20
Zoom out
Zoom in
Previous page
1/32
Next page
1200W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: TVC125 • 06/2020 • 9296
(toll free)
WARNING: Check the HEPA lter (16) regularly for any blockages
which may reduce the suction and cause motor overheating. If the
vacuum noise changes, immediately switch o the appliance by
pressing on the “O on the ON/OFF switch and check the HEPA lter (16).
Clean the HEPA lter (16) ( following cleaning instructions on page 22) and
empty the tank (10) if required.
WARNING: Check the tank (10) regularly and empty the waste
collected when it is about 2/3 full.
Wet Vacuuming
WARNING: Users must strictly observe all warnings and information
contained in section ‘General Safety Instructions’ and in section
‘Specic Safety Instructions’ before operating this appliance.
WARNING: DO NOT use the HEPA lter (16) for wet vacuuming
applications.
IMPORTANT: The Wet and Dry Vacuum should only be connected to a mains
power supply socket; an RCD (Residual Current Device) is recommended.
1. Ensure the tank (10) is completely dry and free from dust and dirt.
2. Only use the foam lter (19) for wet vacuuming
applications (Fig U). Ensure you have already
tted the exible hose (17), extension tubes (18),
and if required, the oor tool (20) or crevice tool
(21) for wet vacuuming applications.
IMPORTANT: Ensure the foam lter (19) is
securely tted before starting the Wet and Dry
Vacuum.
3. Plug the power cord (9) into the mains power
outlet and turn on.
4. To commence vacuum mode operation, press the “I” on the ON/OFF
switch (3) (Fig S).
5. To turn o vacuum mode, press the “O on the ON/OFF switch (3) (Fig T).
6. When wet vacuuming, the oating safety valve (15) closes when the
maximum tank level is reached. In doing so, the suction noise of the
vacuum will change and become louder. When this happens, you
must switch o the vacuum and empty the tank.
U.
17
20


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-tvc125

Reset search

  • I am getting an up to 12v shock from my vacuum after running it for about 3 minutes. Is this just static build up which can be overcome by earthing it or do I toss it out. I thinks its about 10 mouths old. Cheers Richard Submitted on 4-7-2021 at 03:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex TVC125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex TVC125 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info