724578
14
Zoom out
Zoom in
Previous page
1/32
Next page
1200W Wet & Dry Vacuum
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: TVC125 • 06/2020 • 9296
(toll free)
WARNING:
To prevent serious injury from accidental operation, turn the
power switch of the vacuum o and unplug the appliance from its
electrical outlet before performing any procedure in this section.
Before you connect the vacuum to a mains supply, make sure that
the data on the rating / technical label is identical to the mains data.
The Wet and Dry Vacuum should only be connected to a mains
power supply socket; an RCD (Residual Current Device) is
recommended.
The Wet and Dry Vacuum requires some assembly prior to use. This includes
assembly of the wheels, and dependent upon the use of the product, the
exible hose, tubes, lters, and accessories. The following detail covers the
assembly required for each function of the Wet and Dry Vacuum.
Assembly of the wheels
1. Remove the appliance head (2) from the tank (10) by unlocking the
2 x side locking handles (6) pulling them outwards, then upwards (Fig A).
Then turn the tank (10) upside down.
2. Fit the 4 x castor wheels (13) by inserting the mounting pin on the castor
wheel (13) into the designated mounting hole on the underside of the
base (12). Firmly push the castor wheels (13) into the mounting holes
(Fig B).
NOTE: Take care not to damage the castor wheel.
They do not need to be forced into position.
Assembly
B.A.
11
14


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-tvc125

Reset search

  • I am getting an up to 12v shock from my vacuum after running it for about 3 minutes. Is this just static build up which can be overcome by earthing it or do I toss it out. I thinks its about 10 mouths old. Cheers Richard Submitted on 4-7-2021 at 03:42

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex TVC125 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex TVC125 in the language / languages: English as an attachment in your email.

The manual is 5,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info