724613

Ferrex SLM530 Manual

22
Zoom out
Zoom in
Previous page
1/48
Next page
224cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: SLM530 • 08/2019 • 10093
(toll free)
20
Assembly
1. Once the handles are set up as shown in Fig A,
remove the 2 x lower handle locking knobs
( + bolts, & curved washers) (11) from your
accessory bag (Fig B). Place the lower handle in
position to assemble by aligning the
2 x lower handle ends on the outer side of the
lower handle mounting plates (12).
2. Once in position, insert the bolt on each side
through the lower mounting plate (12) from the
inside of the mounting plate (12) through to the
outside of the lower handle (9) (Fig C).
NOTE: You may need to support the lower
handle to engage the bolt through as shown
in Fig C on the left.
3. Once the bolts are loosely in position, t the
plastic curved washer over the end of the bolt,
(Fig D), then screw the lower handle locking knob
over the plastic curved washer and secure by
turning clockwise until
tight and secure (Fig E).
4. Next select the desired position to set the height
of the full handle assembly. There are 3 positions
as shown in Fig F.
It is suggested to select the middle location
to start with. You can then raise or lower the
adjustment after you have seen the overall
height when the assembly is complete.
5. Rotate both of the forward rotating quick adjustment knobs (14) 90°
(Fig G). THESE ARE FIRM TO ROTATE, however, when you rotate these
knobs the location pin is drawn back into the handle. Align the pin with
the selected position (Fig F) and then rotate the forward rotating quick
adjustment knobs (14) 90°. The pin will locate in the selected hole. Repeat
for the opposite side.
D.
C.
B.
(X2)
E.
G.F.
90°
… 22 …


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-slm530

Reset search

  • I am trying to replace belt on self propelled mower! can anyone tell me how to do this?

    Thannkyou Submitted on 5-6-2022 at 07:54

    Reply Report abuse

  • self drive inoperative with motor running and lever fully engaged Submitted on 25-12-2021 at 01:52

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SLM530 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SLM530 in the language / languages: English as an attachment in your email.

The manual is 10,15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info