724591
34
Zoom out
Zoom in
Previous page
1/44
Next page
196cc 4 Stroke Petrol Lawn Mower
AFTER SALES SUPPORT
e-mail: info.aldi@positecgroup.com
1300 889 028
MODEL No.: SLM464 • 02/2020 • 700304
(toll free)
32
4. Repeat the process to remove the other blade.
5. Clean the dirt and grass from around the blade mounting area.
6. Replace the 2 blades to ensure a smooth even cut and re-t them on the
mower in the reverse direction they were removed.
7. Lastly, secure the nuts rmly, (20-25Nm) repeating this for the other blade.
8. Replace the blade mounting plate (37) with new blades attached, then
the outer ange (32), followed by the blade bolt (31). Retighten the blade
bolt tightly (50 – 59Nm).
NOTE: Use a wooden block to stop the blade from turning. The 2 blades
should be tightened fully but check to ensure they can still swing back
if they were to hit a solid object. Where required tighten the bolts with a
torque wrench, the centre disc blade bolt torque: 50 – 59Nm and the 2
blades torque: 20-25Nm. If you do not have a torque wrench ask a mower
service dealer to tighten the blade bolts before you use the mower.
Blades should be replaced when they become worn and no longer cut
the grass cleanly. The performance of grass catching can also reduce if the
blades become worn. Replacement blade sets are available for purchase
from https://help.tools/ or by calling 1300 889 028.
Removing Oil
IMPORTANT: Drain the oil while the engine in still warm to ensure rapid and
complete draining.
1. With the engine o but still warm, disconnect the spark plug cover and
make sure it is kept away from the spark plug (27).
2. Remove the oil drain plug (36) bolt (Fig AJ), using a 10mm spanner (not
supplied) in an anti-clockwise direction to loosen (Fig AK).
WARNING:
Oil may be hot.
AK.AJ.
34


Need help? Post your question in this forum.

Forumrules
1

Forum

ferrex-slm464

Reset search

  • Mower won’t turn off normally.
    How to turn off manually, please. Submitted on 2-12-2022 at 04:59

    Reply Report abuse
  • Gidday how to clean air filter onSLM31 mower thanks
    Submitted on 18-10-2022 at 03:32

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Ferrex SLM464 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Ferrex SLM464 in the language / languages: English as an attachment in your email.

The manual is 8,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info